Jump to content
Security Installer Community

Texecom Veritas R8 Replacement Pcb


matt5595

Recommended Posts

Thats why I was askig what co you were from.... :)

 

It will prove yer innocence, as in we will know you are not him :)


We???

hush little puppy

30 years of experience, ssaib approved family business.

We have a very long list of clients that we are very proud chose to use us. We have never bought out any other company or forced anyone to use us. All of our customers are free to leave us whenever they wish, yet very few ever have. This is down to the fact that we always put our best into every job.

http://alarmguard.co.uk

Link to comment
Share on other sites

Thats why I was askig what co you were from.... :)

 

It will prove yer innocence, as in we will know you are not him :)

hush little puppy

Well looky here, the 6 fingered one grows a pair.

 

If you thought this guy was 4i Matt, then you're dafter than i thought.

Link to comment
Share on other sites

I am not an alarm engineer by any means so most of you will probably not take any notice of this post all matt was asking for is some help not your bank pin number I dont understand why most of you are so defensive with helping people when they have a question we all had to start in our chosen profession somewhere and wether you ask the question on a forum or to a person standing next to you what is the difference you should still offer your best advice possible what I probably think is most of you probably dont even know the answer and rather than be honest and say 'sorry I dont know maybe there will be someone along shortly who will help'it seems that you would rather put somebody down who is asking a geniune question.

Link to comment
Share on other sites

does he wear glasses

lost me...

30 years of experience, ssaib approved family business.

We have a very long list of clients that we are very proud chose to use us. We have never bought out any other company or forced anyone to use us. All of our customers are free to leave us whenever they wish, yet very few ever have. This is down to the fact that we always put our best into every job.

http://alarmguard.co.uk

Link to comment
Share on other sites

damn good engineer tho :)

30 years of experience, ssaib approved family business.

We have a very long list of clients that we are very proud chose to use us. We have never bought out any other company or forced anyone to use us. All of our customers are free to leave us whenever they wish, yet very few ever have. This is down to the fact that we always put our best into every job.

http://alarmguard.co.uk

Link to comment
Share on other sites

look am only asking a few daft questions,

 

alarms are in general piss easy, for a general systems you have 8 zones, each zone is a detector or door contact(reed switch).

 

Most systems are normally closed meaning if a high resistance is detected an alarm activation occurs.

 

Unlike door sensors detectors are also powered by 12V, and you wire the tamper through all detecotrs in a daisy chain method.

 

Batteries are in most cases as little as 1.2Ah 12v and as high as 7Ah for larger panels 

 

You can also get more advanced detecors like volumetric detecors that work on volume aswell as just heat and sideways movement.

 

You can get filters with detecors to stop false alarms from white light sources 

 

Sounders can be wired using a single 6 core cable or 2 x 4 core cables, connection include strobe, bell +, bell -, Tr-, V+

 

You can include a dialler system by hard wiring to two pins on the bt line, and the negative bell trigger on the external sounder to get it toi call out!

Link to comment
Share on other sites

look am only asking a few daft questions,

 

alarms are in general piss easy, for a general systems you have 8 zones, each zone is a detector or door contact(reed switch).

 

Most systems are normally closed meaning if a high resistance is detected an alarm activation occurs.

 

Unlike door sensors detectors are also powered by 12V, and you wire the tamper through all detecotrs in a daisy chain method.

 

Batteries are in most cases as little as 1.2Ah 12v and as high as 7Ah for larger panels 

 

You can also get more advanced detecors like volumetric detecors that work on volume aswell as just heat and sideways movement.

 

You can get filters with detecors to stop false alarms from white light sources 

 

Sounders can be wired using a single 6 core cable or 2 x 4 core cables, connection include strobe, bell +, bell -, Tr-, V+

 

You can include a dialler system by hard wiring to two pins on the bt line, and the negative bell trigger on the external sounder to get it toi call out!

you little tinker 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.