kwc Posted June 16, 2014 Share Posted June 16, 2014 (edited) Also some networks don't get the tones right. Try pulse dial aswell as tone. Edited June 16, 2014 by kwc Quote Link to comment Share on other sites More sharing options...
Tommygunn Posted June 17, 2014 Author Share Posted June 17, 2014 No problem using the landline, house phone to contact any of the nominated mobile numbers or the landline number mentioned above. When the Informer dials to, for example, my mobile phone my mobile does not receive a call.  Ok, I've done a recording of a test call to my mobile from the Informer Dialler. It is with the modem switched off but with the house phone system connected, but obviously not in use.  Here's the link: https://app.box.com/s/m4e0rxj6wtkqwn6xm9yo  The dial tone opens the recording then at 13secs you can hear the engaged/busy signal which continues to the end of the recording.  Tom. Quote Link to comment Share on other sites More sharing options...
al-yeti Posted June 17, 2014 Share Posted June 17, 2014 What's the italian message saying? Quote Link to comment Share on other sites More sharing options...
Tommygunn Posted June 17, 2014 Author Share Posted June 17, 2014 The first part of the message says where the alarm is taking place i.e. the house of Dani and Tom. The second part indicates the type of alarm, in this case a burglary. Â Tom. Quote Link to comment Share on other sites More sharing options...
Tommygunn Posted June 19, 2014 Author Share Posted June 19, 2014 kwc, How would I switch between tone and pulse? Â Tom. Quote Link to comment Share on other sites More sharing options...
james.wilson Posted June 19, 2014 Share Posted June 19, 2014 Id suggest the earlier post of adding a delay before dialing the number was worth a try Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Tommygunn Posted June 19, 2014 Author Share Posted June 19, 2014 Is there a way to introduce a delay as I can't find any way to do that in the instructions? Â Tom. Quote Link to comment Share on other sites More sharing options...
norman Posted June 19, 2014 Share Posted June 19, 2014 try a * or even a P Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
Tommygunn Posted June 19, 2014 Author Share Posted June 19, 2014 I don't understand how that relates to the Informa. Â Tom. Quote Link to comment Share on other sites More sharing options...
norman Posted June 19, 2014 Share Posted June 19, 2014 I'm not familiar with the unit but prefix the tel # with either a * or a P Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.