matthew.brough Posted February 24, 2014 Share Posted February 24, 2014 It is a feature I've not seen on another panel. You can program on a ATS classic freetext based on a zone going open or closed which you can do in software to get it to display an unusual message. Been quite handy in the past www.securitywarehouse.co.uk/catalog/ Link to comment Share on other sites More sharing options...
datadiffusion Posted February 24, 2014 Share Posted February 24, 2014 *** STATIONARY CUPBOARD LIGHTS OFF BUT MOTION DETECTED *** So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
ian.cant Posted February 24, 2014 Share Posted February 24, 2014 Im a bit of an intruder dinosaur but I was under the impression keypads were not supposed to be able to display a set or unset indication for fairly obvious reasons Link to comment Share on other sites More sharing options...
alarming alarm Posted February 24, 2014 Author Share Posted February 24, 2014 I would just like to know when the system is set or unset anyway led's like the 9800 or the lcd screen to say if it is set or unset thanks Link to comment Share on other sites More sharing options...
james.wilson Posted February 24, 2014 Share Posted February 24, 2014 9800 is from 4737 days so level 2 user is irrelevant as 50131 doesn't apply. securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
ian.cant Posted February 24, 2014 Share Posted February 24, 2014 Its unable to do that I'm sure, its gonna be pretty obvious if its set surely? Link to comment Share on other sites More sharing options...
datadiffusion Posted February 24, 2014 Share Posted February 24, 2014 Im a bit of an intruder dinosaur but I was under the impression keypads were not supposed to be able to display a set or unset indication for fairly obvious reasons Yup but it was an option on the 9800. Don't know about BS but guessing an option for non-approved installs like so many features even today? I would just like to know when the system is set or unset anyway led's like the 9800 or the lcd screen to say if it is set or unset thanks No, its not in the manual. Not a feature. So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
matthew.brough Posted February 24, 2014 Share Posted February 24, 2014 Im a bit of an intruder dinosaur but I was under the impression keypads were not supposed to be able to display a set or unset indication for fairly obvious reasons That's only for EN compliant systems www.securitywarehouse.co.uk/catalog/ Link to comment Share on other sites More sharing options...
datadiffusion Posted February 24, 2014 Share Posted February 24, 2014 9800 is from 4737 days so level 2 user is irrelevant as 50131 doesn't apply. Oops didn't see you'd said it already...! So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
matthew.brough Posted February 24, 2014 Share Posted February 24, 2014 *** STATIONARY CUPBOARD LIGHTS OFF BUT MOTION DETECTED *** www.securitywarehouse.co.uk/catalog/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.