whistle Posted December 7, 2013 Share Posted December 7, 2013 100m of 8 core is 4 hours regardless. Link to comment Share on other sites More sharing options...
sw46 Posted January 24, 2014 Share Posted January 24, 2014 I tend to work out how long it would take me while im on site then add a quarter of that again for the lads. Seems to work so far but ive only been in this roll fro a year now, Installing all the time before that. Min 1 hour to fit camera, make off ends, connect, zoom and focus properly. Then its just working out cabling times, obviously quicker for Cat 5 than it is for coax Link to comment Share on other sites More sharing options...
matthew.brough Posted January 24, 2014 Share Posted January 24, 2014 I tend to work on how long it would take me and triple it www.securitywarehouse.co.uk/catalog/ Link to comment Share on other sites More sharing options...
norman Posted January 24, 2014 Share Posted January 24, 2014 I tend to work on how long it would take me and triple it Poor guys. Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
james.wilson Posted January 24, 2014 Share Posted January 24, 2014 I don't think you can generalise like that, different building types etc take longer, ie domestic vs industrial. Sia use a building factor. So (id say an hour per cam is light) we apply 1.7 for a domestic, so if a 1 hour part then its 1.7 for a dwelling type building. securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
MrHappy Posted January 24, 2014 Share Posted January 24, 2014 I wired a bank to pub conversion the other month, 14 circuits (2 off rkp, 1 smc off DT) part under boards, part unscrewing plaster board, part above new ceiling & part chased walls for oval, with live & decoy boxes up in 6hrs, I returned the next day (saturday)& put a xl smc on steel FX with bit of trunking,xl smc on alloy folding door, & xl smc on softwood cellar door, 2hrs 2nd fixed in 6hrs, 9 pir, end station, rkp, xp, end station, now if the site conditions where better & I had all the gear (short of contacts, twist drills, trunking, oval tube, oval clip) I could have shaved the time down. However gains in time where whittled by waiting for a wall in the kitchen, On the flip side of the coin, 2 of us went to add a maglock & move readers & mcp from left to right of double doors, 4 hours of ******* about including the 2a psu failing after being powered down Mr Veritas God Link to comment Share on other sites More sharing options...
goncall Posted January 24, 2014 Share Posted January 24, 2014 no magic formula,only takes one thing to go wrong and your over on hours should even itself out over the course tho Link to comment Share on other sites More sharing options...
datadiffusion Posted January 24, 2014 Share Posted January 24, 2014 I went to do a service today and add detector literally 1m as the crow flies from the panel... All I can say is glad I didn't give a fixed price for the detector.... fffs. Builders had been in since initial install and it was a triple skin wall with varying height floating ceilngs etc... in what was once (still is a Garage) a lean to... Panel side once a cupboard, now all neatly decorated with feature wallpaper etc... so couldn't eventrunk it it, had to go up, across, and down again. 3 hours! So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
Alarm Protection Posted January 24, 2014 Share Posted January 24, 2014 DT masked today to find out joiners cut a square in bit of wood and laid DT on a metal beam. Company taking down 2 workshop offices to make bigger space with shelving. 2 hours later and job done but they will pay for a late Friday callout!) ! Link to comment Share on other sites More sharing options...
arfur mo Posted January 24, 2014 Share Posted January 24, 2014 His name's Jason. (Jayson actually If you think education is difficult, try being stupid!!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.