spike27 Posted October 31, 2013 Share Posted October 31, 2013 We've recently seen an increase in requests for surface door contacts in black. Whether this is as result of changes in architects' fashion tastes, or simply more black doors and frames being installed, we're not sure. We've responded to this by offering any of our range in black, subject to an initial set up cost. If however, the contact is already on the list below (as being made previously for someone else), then there is no such charge: http://www.knightfireandsecurity.com/catalogue.asp?id=30 http://www.linkedin.com/profile/view?id=74794063 Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted October 31, 2013 Share Posted October 31, 2013 Very good idea. IMO a dark grey would be more useful. Seeing a hell of a lot more aluminium bi-fold doors in dark grey. Either way black will look a lot better than white or brown on dark grey. Link to comment Share on other sites More sharing options...
datadiffusion Posted October 31, 2013 Share Posted October 31, 2013 Unique I'd imagine. Nice one. @ 'Spike' - Will be digging deep into that samples box tomorrow, at last, will report back! So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
spike27 Posted October 31, 2013 Author Share Posted October 31, 2013 Very good idea. IMO a dark grey would be more useful. Seeing a hell of a lot more aluminium bi-fold doors in dark grey. Either way black will look a lot better than white or brown on dark grey. Technically speaking, we can manufacture contacts (plastic made parts such as ABS, polystyrene etc) in any colour, as long as you provide us with the Pantone colour code, but there would be that initial set up cost. Unique I'd imagine. Nice one. @ 'Spike' - Will be digging deep into that samples box tomorrow, at last, will report back! No worries! Look forward to hearing back from you - as I said, negative feedback also welcome so we can improve products! http://www.linkedin.com/profile/view?id=74794063 Link to comment Share on other sites More sharing options...
datadiffusion Posted October 31, 2013 Share Posted October 31, 2013 OK So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
MrHappy Posted October 31, 2013 Share Posted October 31, 2013 I would suspect it would be easier to do a run of blk cases in std & jb type & sell empty cases than produce assembled stock ? I'd also make the fussy buggers buy them as 10 of 'em in a bag, economy of scales ect... Mr Veritas God Link to comment Share on other sites More sharing options...
Ronnie Posted October 31, 2013 Share Posted October 31, 2013 I would suspect it would be easier to do a run of blk cases in std & jb type & sell empty cases than produce assembled stock ? I'd also make the fussy buggers buy them as 10 of 'em in a bag, economy of scales ect... that's how the brown covers for shock's come from risco - just swap out the guts Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted October 31, 2013 Share Posted October 31, 2013 I would suspect it would be easier to do a run of blk cases in std & jb type & sell empty cases than produce assembled stock ? I'd also make the fussy buggers buy them as 10 of 'em in a bag, economy of scales ect... I completely agree Link to comment Share on other sites More sharing options...
ChrisMurphy Posted October 31, 2013 Share Posted October 31, 2013 agree with the just supply casings......... agree that grey/silver is more of a common issue. 30 years of experience, ssaib approved family business. We have a very long list of clients that we are very proud chose to use us. We have never bought out any other company or forced anyone to use us. All of our customers are free to leave us whenever they wish, yet very few ever have. This is down to the fact that we always put our best into every job. http://alarmguard.co.uk Link to comment Share on other sites More sharing options...
spike27 Posted December 3, 2013 Author Share Posted December 3, 2013 So we should supply packs of 10 housings, and you would use the innards from another one of our 'white' contacts? The thing is, you'd then also need the magnet side in, plus any spacers and the base for the PCB as this is slightly visible.... Surely it would be easier to just buy as many grey / silver products as you need? http://www.linkedin.com/profile/view?id=74794063 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.