Jump to content
Security Installer Community

Yuasa Batteries


wilks121

Recommended Posts

Or the panel developed a fault, drained the battery and reverse charged.

Why asking about a rattle.

 

But I`d go with being started in the factory reversed.

 

It would work, but the plates are not designed to work that way and it would go bang eventually.

Link to comment
Share on other sites

I had a powersonic like that before, previous company connected it the wrong way round and the elmdene supply didn't pop, it just charged it up in reverse. Put it on my act gold plus and it measured 13.68v and 4.8ah just backwards at 3 years old.

Good thing it wasn't a 24v elmdene, they can go on fire if the batteries short, there is no battery fuse.

Link to comment
Share on other sites

As a kid working in garages, when Jap bikes came in they had to be assembled and the batts had to be filled and charged. i got to see the results of reversing the polarity to about a dozen bike batteries, blew the lead connection poles, bits of casing and sulphuric acid all over the workshop.

Thankfully it was the habit these batteries were only charged last thing over night due to the charger being used on car batts during the day.

If you think education is difficult, try being stupid!!!!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.