Rokonet Pir Wiring

[Jeeva]

Hi There - I was looking for the contact for Dale who has offered a wiring diagram on the Rokonet PIR - I see he has already assisted some one with the wiring. The PIR has the following:

2 x alarm inputs, 2 x tamper inputs and a negative and positive input. The brochure does not at all state how this must be wired. It also has an input for a jumper near the leds. Please assist. Much appreciated.

Jeeva

*edit jpw

[arfur mo]

be nice ti know which Risco detectir model .

but generally in most makes -:

Positive will +

Negative will be -

tamper is a simple switch circuit through the ld and in some rear contacts.

the alarm 'pair' normally denoted as C & NC, are a simple circuit closed through the Detectors relay, will show lo ohms when powered and detector not detecting, connected to a zone 'pair'.

drawing in box should show ths.