ryan042000 Posted April 12, 2013 Share Posted April 12, 2013 Reinstallin a delta 5 due to panel change any one know how to wire these into a texecom elite 48 This is a pic of the terminals Link to comment Share on other sites More sharing options...
sjsturner Posted April 12, 2013 Share Posted April 12, 2013 Theres no pic showing ryan. What terminals are there? Link to comment Share on other sites More sharing options...
ryan042000 Posted April 12, 2013 Author Share Posted April 12, 2013 1. Siren hi-off 2. V+ 3. 0v 4. Siren 5 batt - 6. Batt + 7. Tamp 8. Tamp 9. St + 10. St- Link to comment Share on other sites More sharing options...
Paul. Giles Posted April 12, 2013 Share Posted April 12, 2013 Seems self explanatory? Link to comment Share on other sites More sharing options...
matthew.brough Posted April 12, 2013 Share Posted April 12, 2013 Seems self explanatory? +1 www.securitywarehouse.co.uk/catalog/ Link to comment Share on other sites More sharing options...
ryan042000 Posted April 12, 2013 Author Share Posted April 12, 2013 Yes i thought so to but the siren just starts up when power is applied to terminal 2&3 and the tamper switch is closed a red and green led energise when thamper switch is closed bit confused im used to adt bells Link to comment Share on other sites More sharing options...
sjsturner Posted April 12, 2013 Share Posted April 12, 2013 Soz just got back. So you have wired " bell " from texe panel to " siren " on bell box yeah? Link to comment Share on other sites More sharing options...
ryan042000 Posted April 12, 2013 Author Share Posted April 12, 2013 Yeh if i can figure out the hold off and the sab im sorted got the tamper sorted byt im not sure if theres somthing wring with the sab do you know if this needs a pos trig or neg Link to comment Share on other sites More sharing options...
sjsturner Posted April 12, 2013 Share Posted April 12, 2013 How have you connected this up? Link to comment Share on other sites More sharing options...
sjsturner Posted April 12, 2013 Share Posted April 12, 2013 Judging from what i can gather you need Terms 1= 0v 2= 12v 3= 0v 4= bell trig 5+6 you know what to do with that! 7= 0v 8= tmp return 9= 12v 10= strobe You can put 0v in term 3 and link terms 3 and 1 and 7 together in bell box Also put 12v pos in term 2 and link 2 and 9 together Then your bell trig goes in term 4 Your tmpr return in 8 Strobe trig in 10 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.