steq184 Posted August 4, 2012 Share Posted August 4, 2012 Hi I have an Accenta G4 panel connected up to the yellow ADT bellbox, system is about 9 months old and has works perfectly up to now. Now find that the bellbox does not sound or strobe even when testing through the alrm test feature on the panel. No wiring has been changed since first install. Any ideas what the problem could be??? Any expert advice would be very appreciated. Thankyou Steve Link to comment Share on other sites More sharing options...
james.wilson Posted August 4, 2012 Share Posted August 4, 2012 I'm guessing no hold off, but first will need piccies of panel and sounder wiring. And you will need a volt meter securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Alarm Protection Posted August 4, 2012 Share Posted August 4, 2012 Blown fuse in panel with no backup battery attached? Do you have a tamper alert on the panel? ! Link to comment Share on other sites More sharing options...
Scotmod Posted August 6, 2012 Share Posted August 6, 2012 Can you set the system? when you're going through the walk test does the internal speaker sound? Was it installed by ADT? Link to comment Share on other sites More sharing options...
9651 Posted August 7, 2012 Share Posted August 7, 2012 This is a DIY job with the name outside Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.