Jump to content
Security Installer Community

+Bat Mis 0001 - Error On Galaxy Alarm


Recommended Posts

Hello!

The alarm that we have inherited comes up with a +BAT MIS 0001 error code, which won't let us set the alarm.

All worked fine for the last 3 years, I've recently replaced the batteries on each of the 4 wireless points after one of them had died.

The info I've managed to get on this is as follows:

---

CPO38 Honeywell

Grade 3 Class II

--

Galaxy 2-12

Version 1.44

--

ADT

ED8 - 7300

PC+ABSFR

Hope someone could tell me what the error code means (tried googling without luck)...

I've seen some posts refer to the 12V battery, which I assume is the block on the wall opposite the keypad, could it be that it is on its way?

Many Thanks!

Link to comment
Share on other sites

  • 1 month later...

Hello - my alarm started showing the same error message. Can you please let me know what battery I need for this, and whether it's a simple job (or requires a technican to perform).

I'm no longer monitored by ADT, and have a reasonable level of DIY/electrical skill!

thanks!

Link to comment
Share on other sites

  • 2 months later...
  • 8 years later...

 Voltage with my meter indicated 12.78 volts and 385ma, really strange went to set the alarm this evening - stuck in engineer mode due to error message 

of +batt missing 0001 has cleared by itself. So took alarm out of Engineer  mode and it reset with no tamper errors or batt errors and reported 6 modules before and after and all ok. So don’t know what has happened between this morning and this evening but it seems ok. So let’s hope all is well. And big thanks for the swift reply earlier 

 

Edited by SteveO99
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.