jonnychesterfield Posted March 28, 2012 Share Posted March 28, 2012 Hi, Appreciate if anyone can offer any guidance on this one: The control panel is emitting a single beep each time a detector is triggered. The panel then shows a light related to the zone that was triggered. It's as though its in walk test mode, but trying to exit this (pressing 'X') had no effect other than clearing the zone lights on the panel. Can anyone please advise how to turn this off? Regards, Jon Quote Link to comment Share on other sites More sharing options...
whistle Posted March 28, 2012 Share Posted March 28, 2012 Press the chime button then press the button corisponding to what led's are lit. This will turn off the chime on the zones iluminated. Quote Link to comment Share on other sites More sharing options...
jonnychesterfield Posted March 28, 2012 Author Share Posted March 28, 2012 That's cured it - for the advice! Regards, Jon Quote Link to comment Share on other sites More sharing options...
pswarman Posted March 18, 2020 Share Posted March 18, 2020 That helped me too. MANY THANKS. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.