Jump to content
Security Installer Community

Pet Tolerant Pir


Recommended Posts

Recently moved, and about to upgrade alarm (new panels sensors etc). Currently house has shocks sensors on all windows and doors downstairs, and door contacts on upstairs doors.

All windows are being replaced from wood to upvc, and I have been advised that shock sensors are not suitable for upvc frame. Also then would not detect an intruder entering through an open window, etc

I am therefore looking to fit 4 PIR sensors, but would like to use pet tolerant sensors, as I have a dog (approx 6kg)

I have looked at Texecom 3D-PetWise, and the Bosch Blueline Gen2

I would be inclinded to use the Texecom as it is stocked by my usual supplier, has anyone used this, or would you recommend something else.

Is pet tolerant PIR the way to go, or is there some better technology,

Link to comment
Share on other sites

  • Replies 22
  • Created
  • Last Reply

Texecom do a petwise dual tech, much better. i did install 4 of the pir versions once, but they were false alarms waiting to happen.ended up replacing all with the dt version. no matter which you go for, the placement of them is extremely tricky as even a spider will appear human sized to them if it is within 100mm of them, so anything a cat etc could get onto has to be a fair distance from the detector. saying that, we havnt had one false alarm from the 2 cats at those premises in the 4 ish years they have been thwre. go for the DT version as i say above

Link to comment
Share on other sites

I'm a texecom fan, but don't like their pet sensors, I have heard that the Bosch sensors are very good

The opinions I express are mine and are usually correct!

(Except when I'm wrong)(which I'm not)

Link to comment
Share on other sites

If the shocks can stay, then might as well keep them (fit new sensors, as wiring in already in place) to further increase the system.

Only hear good things about the boschs, so may go with them. WIll have a look into the DT texecoms first tho

Link to comment
Share on other sites

I'm a texecom fan, but don't like their pet sensors, I have heard that the Bosch sensors are very good

My thoughts exactly . If we do fir pet we normally fit i-Wise.

The prestige pet PIR's are proper cack. Was setting one up with the customer watching me, this PIR was making me look more of a tool than normal! Very poor pick up. Lucky I had a i-Wise to get me out of trouble........... "Yeah it must have been faulty that Texe pet pir" ...... eeer!

We have got some Pyronix to try, might suggest the Bosch if they are well regarded :)

Link to comment
Share on other sites

  • 3 weeks later...

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.