kamshaft Posted August 26, 2011 Share Posted August 26, 2011 Hi Guys, Ive just installed a veritas r8 alarm in my house and im having a few problems commissioning it! Going thru the Installation manual I enter 1234 and press PROG. I then do a walk test but on the keypad Zones 7&8 red lights stay on constantly and the box beeps 8 times. all the other zones work OK. Had a look in the manual and cant seem to see anything to help me out! Can any of you guys help me please? thanks Link to comment Share on other sites More sharing options...
kamshaft Posted August 26, 2011 Author Share Posted August 26, 2011 just an update, the box actually beeps 9 times not 8 as i stated above, and the tamper light stays red and the unset light flashes green. Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted August 26, 2011 Share Posted August 26, 2011 You have a tamper on either the bell or detectors. If you are "commissioning it" you should have measured the readings of the cables and know where the fault is. Link to comment Share on other sites More sharing options...
james.wilson Posted August 26, 2011 Share Posted August 26, 2011 you will need to test each tamper circuit to see which one is open. securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
breff Posted August 26, 2011 Share Posted August 26, 2011 It could also be the panel lid or keypad tamper The opinions I express are mine and are usually correct! (Except when I'm wrong)(which I'm not) Link to comment Share on other sites More sharing options...
modernjim Posted August 26, 2011 Share Posted August 26, 2011 End station tamper can be a problem try refiting lid Link to comment Share on other sites More sharing options...
Paul66 Posted November 7, 2011 Share Posted November 7, 2011 Did you link out the zones not in use ie 7 and 8. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.