RichL Posted March 19, 2011 Share Posted March 19, 2011 If I struggle to find a fob then can I use an RKP that works with the 593? The link of the one from the RS components site in my 1st post suggests it works with the 593... can anyone confirm? Thanks The 593 will require a six wire keypad, the one in your link is almost certainly the newer 4 wire type so no it probably wont work. Edit - Manufacturers Part No. 01152PA4W, no it wont work on your control panel. Originally said by Charles Babbage On two occasions I have been asked [by members of Parliament], 'Pray, Mr. Babbage, if you put into the machine wrong figures, will the right answers come out?' I am not able rightly to apprehend the kind of confusion of ideas that could provoke such a question. Link to comment Share on other sites More sharing options...
Guest EmJ Posted May 25, 2011 Share Posted May 25, 2011 Does any one have any advice - we have a Gardtec 593 that has been going off every hour over night. The keypad says 'Check Battery/Fuse'; we're going to change the battery, but is there anyway to turn the alarm/bell off? Thanks Link to comment Share on other sites More sharing options...
IAS Posted May 25, 2011 Share Posted May 25, 2011 change battery Link to comment Share on other sites More sharing options...
9651 Posted May 25, 2011 Share Posted May 25, 2011 Hope its not on engineer lock out Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.