max1 Posted April 8, 2009 Share Posted April 8, 2009 hi, ive recently moved into a new house with an alarm system. the former occupier left the code for the alarm for me, but i want to change it to my own code. im not sure what system it is and i have no user manual, all it has written on the front is that its a Concept advanced microprocessor Control. i wondered if there was anyway you would know what system it is or how i could change the code. kind regards max1 Link to comment Share on other sites More sharing options...
magpye Posted April 8, 2009 Share Posted April 8, 2009 hi, ive recently moved into a new house with an alarm system. the former occupier left the code for the alarm for me, but i want to change it to my own code. im not sure what system it is and i have no user manual, all it has written on the front is that its a Concept advanced microprocessor Control. i wondered if there was anyway you would know what system it is or how i could change the code.kind regards max1 Not sure if this is your 'Concept' or not, but, this might br the way to change your code. Fingers crossed ADE_Concept_6_User_Manual_.pdfMeant to say, please let us know if this works or not, I can then make a note against this file, . Someone told me I was ignorant and apathetic, I don't know what that means, nor do I care. Link to comment Share on other sites More sharing options...
Guest RJBsec Posted April 8, 2009 Share Posted April 8, 2009 This might help you: ADE_concept_User.pdf Link to comment Share on other sites More sharing options...
james.wilson Posted April 8, 2009 Share Posted April 8, 2009 <PROG>, Old code, <8> , New Code reset and thats it chnaged. securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
TonyCraggs Posted April 21, 2009 Share Posted April 21, 2009 redbull is correct! Hawk Fire & Security Ltd Specialist Installers Of Intruder Alarms, CCTV, Fire Alarms, Door Access & Entry Systems Tel. 07786037709 Email. hawkfireandsecurity@live.co.uk KING OF TETRIS !!! Link to comment Share on other sites More sharing options...
evilhomer1942 Posted April 27, 2009 Share Posted April 27, 2009 redbull is correct! Hello People.. I believe I have this exact same alarm in my own home. When I first moved in just over three years ago, I managed to contact the original installer, who for a fee came out and reset everything for me. It worked fine, until there was a power cut.. when after a while, I assume the battery failed and the alarm started sounding. This stopped once the power came back up, however the alram panel, although appearing fine, appeared to have forgotten my code, and simply did nothing but beep as keys are pressed. Engineer call out two... more expensive, but a fraction of the time to complete the task... like 5 mins!! Still I was happy as it all worked again. Until yesterday... another powercut. Same problem.. I have the user manual above, but none of these options seem to work... What do I need to do? Is there an original installation manual that'll stop me from having to pay this man his massive sums for his quick fix that I do not understand? Help.. Please!!! Link to comment Share on other sites More sharing options...
james.wilson Posted April 27, 2009 Share Posted April 27, 2009 to be fair mate, it shouldnt do that on a power failure. Id get it serviced properly rather than just bodged to make it work again.... for a bit securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
evilhomer1942 Posted April 27, 2009 Share Posted April 27, 2009 to be fair mate, it shouldnt do that on a power failure. Id get it serviced properly rather than just bodged to make it work again.... for a bit Don't know if I made myself clear.. it's not instant, I assume its after the battery dies... at which point it seems to lose its code memory.... Does that make any difference, or do you still think its knackered? Just seems wierd that he fiddles for a few mins, and its all back to normal running correctly. Link to comment Share on other sites More sharing options...
Chorlton Posted April 27, 2009 Share Posted April 27, 2009 Hello People.. I believe I have this exact same alarm in my own home. When I first moved in just over three years ago, I managed to contact the original installer, who for a fee came out and reset everything for me. It worked fine, until there was a power cut.. when after a while, I assume the battery failed and the alarm started sounding. This stopped once the power came back up, however the alram panel, although appearing fine, appeared to have forgotten my code, and simply did nothing but beep as keys are pressed. Engineer call out two... more expensive, but a fraction of the time to complete the task... like 5 mins!! Still I was happy as it all worked again. Until yesterday... another powercut. Same problem.. I have the user manual above, but none of these options seem to work... What do I need to do? Is there an original installation manual that'll stop me from having to pay this man his massive sums for his quick fix that I do not understand? Help.. Please!!! hello & welcome regards enginner / installation manuals - http://www.thesecurityinstaller.co.uk/comm...mp;f=4&id=8 + this is a security installer forum (clues in the domain name) your not gonna make friends or get help saying "massive summs for a quick fix" or similar as it sounds like your saying were crooks TBH c. Link to comment Share on other sites More sharing options...
Guest RJBsec Posted April 27, 2009 Share Posted April 27, 2009 Concept = no NVM Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.