Jump to content
Security Installer Community

Contact Help!


Recommended Posts

Hi there people,

I'm a little stuck with wiring the contacts (Honeywell Surface Contact) on a system i'm putting in. I have all the PIRs (Pyronix KX15DQs) up and running and the rest of the system (Avanti XP with LCD RKP) seems fine. The problem i'm having is understanding how to wire a contact. I know the sensors are working on 2 resistors (operated by pin jumpers in the PIR) at 2k2 each. How would this translate to a door contact? Each Sensor (PIR and Contact) has it's own dedicated cable run in 8 Core. I know the contacts have to have an EOLR but does it have to be SEOLR or DEOLR and how would you wire either of these configurations?

I have attached a picture of the contacts I am using so you know what i'm waffling on about.

Thank you in advance for your time and I hope you can help me out of a fix.

Tim Cooper

post-26626-1238368586_thumb.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.