Guest brianilland Posted July 7, 2003 Share Posted July 7, 2003 Hi there, I have a house with a Scantronic 9200 and it worked fine for the last 6 months since moving in. As of last weekend zone 1 is constantly on when I set the alarm. There are 2 sensors for zone 1. Both sonsors have the red light on constantly. Has anyone got any ideas on how I can trace the fault for this, or can you send the manuals to brianilland@tiscali.co.uk. Zone 2 and the sensor on the door appear to be working fine. I had someone come out to look at it who told me that I'd need a new system fitted after looking at it for 5 mins. Any ideas or help would be greatly appreciated.... Link to comment Share on other sites More sharing options...
mr silcox Posted July 8, 2003 Share Posted July 8, 2003 think it may be latched on will e-mail you with an idea Link to comment Share on other sites More sharing options...
Service Engineer Posted July 9, 2003 Share Posted July 9, 2003 Where latching detectors have been used there is usually a reset button or keypad driven resetting device near to the panel. Check your panel for an externally mounted button. ........................................................ Dave Partridge (Romec Service Engineer) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.