Jump to content
Security Installer Community

Csl Dualcom Gsm Installation


BBSS

Recommended Posts

We have stopped using the signal test meter as we have found it always gives a better signal than the actual fitted figure. We now use a dualcom on a battery with the NVM chip removed to get a 100% accurate reading.

The opinions I express are mine and are usually correct!

(Except when I'm wrong)(which I'm not)

Link to comment
Share on other sites

  • Replies 28
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Guest old-hand
We have stopped using the signal test meter as we have found it always gives a better signal than the actual fitted figure. We now use a dualcom on a battery with the NVM chip removed to get a 100% accurate reading.

Good call, but you missed my point!

Link to comment
Share on other sites

Guest RJBsec
well yes, but Roger was implying that you can just fit and run. I thought the statement needed some balance

Radio strength test, actual or anticipated, is obviously necessary before fitting but in my experience, in my area, I have yet to find an site where Dualcom could not be used - I have had just one experience of where I was unable to upgrade from a 'Paknet' pad to GPRS.

Link to comment
Share on other sites

  • 5 years later...

Apart from the possible issue highlighted recently would you say dualcom less issues than webway overall? Would you drop Ernest in favour if dualcom ?

Drop webway I meant

Link to comment
Share on other sites

Apart from the possible issue highlighted recently would you say dualcom less issues than webway overall? Would you drop Ernest in favour if dualcom ?Drop webway I meant

I think you're talking to yourself on this one.

Link to comment
Share on other sites

was it ever cleared up if they were returns or new units I presume new units as in the box,

30 years of experience, ssaib approved family business.

We have a very long list of clients that we are very proud chose to use us. We have never bought out any other company or forced anyone to use us. All of our customers are free to leave us whenever they wish, yet very few ever have. This is down to the fact that we always put our best into every job.

http://alarmguard.co.uk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.