Alarm Protection Posted February 16, 2009 Share Posted February 16, 2009 I would check your outputs from the panel to the bell in programming....if that is ok then try another bell unit. There is not much more you can do. ! Link to comment Share on other sites More sharing options...
1172 Posted February 20, 2009 Share Posted February 20, 2009 Hello allI really need some help.. Ive fitted my first i-on16 system today, All seems fine.. Getting maximum signal strength even with the PIR at total opposite end of the house in conservatory. Im impressed Anyway.. Everything seems fine exept the external bellbox, The bell box i have used is a Texecom Odyssey. I have power at the box, strobe is connecting fine, Blinking as it should in day mode. I JUST CANT GET AN EXTERNAL SIREN.. No sound from the box. Ive done the test on the i-on16 panel activating the external bell On/Off... But nothing????? I would really appreciate someones help on this. If someone could email xxxxxxxxxxxxxxxxxxxxxxxx or let me know your email add and ill email you.. I have photos to show you of the connections so far.. Maybe someone can show me what ive missed?? I really appreciate someone help. Thank you Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.