Guest anguscanplay Posted August 31, 2008 Share Posted August 31, 2008 the beeping - log or "scroll " button? just follow these simple steps - engineer mode - zone number - three - should be 0 if its 1 thats on soak test - sack the other engineer - dont tell the customer - sorted Link to comment Share on other sites More sharing options...
SIMONADT Posted August 31, 2008 Author Share Posted August 31, 2008 the beeping - log or "scroll " button?just follow these simple steps - engineer mode - zone number - three - should be 0 if its 1 thats on soak test - sack the other engineer - dont tell the customer - sorted quality!!! consider him sacked. anyone for a job in the isle of man? lol Fire and Security Service Engineer ***Any views or statements above are not the views of my Employer*** Link to comment Share on other sites More sharing options...
Guest anguscanplay Posted August 31, 2008 Share Posted August 31, 2008 quality!!!consider him sacked. anyone for a job in the isle of man? lol Ive seen sites where soak test was used to disconnect stuff, because your going to down the stu at half past bedtime so you can get to the terminals? yeah right lol Link to comment Share on other sites More sharing options...
hpotter Posted August 31, 2008 Share Posted August 31, 2008 Also, there was a quirky thing on 9100 where sometimes to clear "call eng" you had to go in and out (inc open lid tamp) twice to clear it. Link to comment Share on other sites More sharing options...
Guest anguscanplay Posted August 31, 2008 Share Posted August 31, 2008 Also, there was a quirky thing on 9100 where sometimes to clear "call eng" you had to go in and out (inc open lid tamp) twice to clear it. now that I`ve never come across, do remember that the customer couldnt reset tamper "H" activations though (mainly remembered because we connected the first couple of remote reset units to it - DOH) Link to comment Share on other sites More sharing options...
SIMONADT Posted August 31, 2008 Author Share Posted August 31, 2008 d'oh!! Fire and Security Service Engineer ***Any views or statements above are not the views of my Employer*** Link to comment Share on other sites More sharing options...
hpotter Posted September 1, 2008 Share Posted September 1, 2008 Also, there was a quirky thing on 9100 where sometimes to clear "call eng" you had to go in and out (inc open lid tamp) twice to clear it. Similar problem, sometimes when you come out of eng zone 4 lit up for no reason. In & out of engineers clears it! Dont know why. Link to comment Share on other sites More sharing options...
Nova-Security Posted September 1, 2008 Share Posted September 1, 2008 can the lid t be linked out like Galaxy? Class..........Then the system wont conform. www.nova-security.co.uk www.nsiapproved.co.uk No PMs please unless i know you or you are using this board with your proper name. Link to comment Share on other sites More sharing options...
SIMONADT Posted September 1, 2008 Author Share Posted September 1, 2008 Class..........Then the system wont conform. sorry captain british standard!! Fire and Security Service Engineer ***Any views or statements above are not the views of my Employer*** Link to comment Share on other sites More sharing options...
Nova-Security Posted September 1, 2008 Share Posted September 1, 2008 sorry captain british standard!! Suppose you could link it out, then they get robbed and the loss adjuster finds panel lid link out, insureres wont pay out as system has one little deveation goes back to your compnay who finds out you where the last engineer on site pins blame on you, gets rid for gross misconduct shows up on your vetting cant get another job. As the saying goes 'if in doubt link it out' www.nova-security.co.uk www.nsiapproved.co.uk No PMs please unless i know you or you are using this board with your proper name. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.