SIMONADT Posted August 31, 2008 Share Posted August 31, 2008 Dudes Had a callout to a series 3000 and the call engineer light was flashing with no fault on the display. got it into engineers, checked the fuses, power, battery etc etc, 99'd it but still it says call engineer. any ideas? had the same in the past but it came up with either a zone or a specific fault. si Fire and Security Service Engineer ***Any views or statements above are not the views of my Employer*** Link to comment Share on other sites More sharing options...
camerabloke Posted August 31, 2008 Share Posted August 31, 2008 too old, bin it and stick a galaxy in Eucam Security Systems 0845 4630 746 www.eucam.co.uk Link to comment Share on other sites More sharing options...
SIMONADT Posted August 31, 2008 Author Share Posted August 31, 2008 customer wont pay... even on a service day works Fire and Security Service Engineer ***Any views or statements above are not the views of my Employer*** Link to comment Share on other sites More sharing options...
abbz Posted August 31, 2008 Share Posted August 31, 2008 Check to see whether any of the ccts are on test. The call eng light flashes if the cct has failed Link to comment Share on other sites More sharing options...
SIMONADT Posted August 31, 2008 Author Share Posted August 31, 2008 Check to see whether any of the ccts are on test. The call eng light flashes if the cct has failed The last time someone was there was Feb this year for an RI... nothing is on test. Fire and Security Service Engineer ***Any views or statements above are not the views of my Employer*** Link to comment Share on other sites More sharing options...
james.wilson Posted August 31, 2008 Share Posted August 31, 2008 whats in the log? securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
abbz Posted August 31, 2008 Share Posted August 31, 2008 The last time someone was there was Feb this year for an RI... nothing is on test. Unlike modern day panels when you put a cct on test on a 9100 they stayed on test until they were removed via the programming and not after a certain amount of days. Ccts on test will still show up as normal on a walk test. Link to comment Share on other sites More sharing options...
SIMONADT Posted August 31, 2008 Author Share Posted August 31, 2008 Unlike modern day panels when you put a cct on test on a 9100 they stayed on test until they were removed via the programming and not after a certain amount of days. Ccts on test will still show up as normal on a walk test. nice one, i'll try that tomorrow then. The log doesnt work, it beeps to say end of list all the time!!! Fire and Security Service Engineer ***Any views or statements above are not the views of my Employer*** Link to comment Share on other sites More sharing options...
breff Posted August 31, 2008 Share Posted August 31, 2008 Doesn't the 9100 do that on a panel lid tamper? try 99 with the tamper spring held down, those lids can be buggers to get on. The opinions I express are mine and are usually correct! (Except when I'm wrong)(which I'm not) Link to comment Share on other sites More sharing options...
SIMONADT Posted August 31, 2008 Author Share Posted August 31, 2008 Doesn't the 9100 do that on a panel lid tamper?try 99 with the tamper spring held down, those lids can be buggers to get on. it seemed to be locating the tamper when closing it but will try that too!!! can the lid t be linked out like Galaxy? Is the spring on a circuit with points anywhere? Fire and Security Service Engineer ***Any views or statements above are not the views of my Employer*** Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.