Jump to content
Security Installer Community
Sign in to follow this  
imroberts

Securit 700l Problem

Recommended Posts

I have recently disconnected and reconnected a couple of sensors due to decorating and have since been unable to set my alarm.

As soon as I start to enter the code the control panel starts beeping, and will continue beeping until I press # and wait a few seconds.

:(

I'm guessing this has locked me out due to something I've done wrong... can anyone tell me why or how I can resolve this?

Share this post


Link to post
Share on other sites
Guest anguscanplay
Everything is back as it was, still the same problem :(

obviously not back as was then - do you have a test meter ?

billy - why do you have a Police record ....

...as a siggy

Share this post


Link to post
Share on other sites
obviously not back as was then - do you have a test meter ?

All the wiring is back as it was. The alarm isn't operating though. It doesn't even set off the tamper alarm if things are tampered with, it's as if it has switched off all monitoring.

And yes, I have a test meter :)

Share this post


Link to post
Share on other sites
All the wiring is back as it was. The alarm isn't operating though. It doesn't even set off the tamper alarm if things are tampered with, it's as if it has switched off all monitoring.And yes, I have a test meter :)
endstation?
billy - why do you have a Police record ....
its all I want to say to you ;)

De Do Do Do, De Da Da Da. De Do Do Do, De Da Da Da

Share this post


Link to post
Share on other sites

try pressing your code and * - it probably just needs a reset (code + star (*) = reset.)

Assuming that your TAMP (tamper) light is,nt still illiminated that will clear the system.

paul


THE BLACK KNIGHT

"Any comments / opinions posted are my opinion only and do not represent those of my employer or Company."

Share this post


Link to post
Share on other sites
try pressing your code and * - it probably just needs a reset (code + star (*) = reset.)

Assuming that your TAMP (tamper) light is,nt still illiminated that will clear the system.

paul

code + star is reset

code + # is reset ????


De Do Do Do, De Da Da Da. De Do Do Do, De Da Da Da

Share this post


Link to post
Share on other sites
code + star is reset

code + # is reset ????

also possible - it was late last night and i had had a few bevvies - now i need coffee!!!

p


THE BLACK KNIGHT

"Any comments / opinions posted are my opinion only and do not represent those of my employer or Company."

Share this post


Link to post
Share on other sites
Guest anguscanplay
also possible - it was late last night and i had had a few bevvies - now i need coffee!!!

p

LOL so hows the head ?

Share this post


Link to post
Share on other sites

I've already tried resetting the alarm but to no avail :(

As soon as I press ANY button it just starts beeping constantly, and then doesn't seem to register that you've pressed buttons afterwards

Share this post


Link to post
Share on other sites
I've already tried resetting the alarm but to no avail :(

As soon as I press ANY button it just starts beeping constantly, and then doesn't seem to register that you've pressed buttons afterwards

_40806541_skip203.jpg

Share this post


Link to post
Share on other sites
Guest anguscanplay
I've already tried resetting the alarm but to no avail :(

As soon as I press ANY button it just starts beeping constantly, and then doesn't seem to register that you've pressed buttons afterwards

did you take the keypad off too?

Share this post


Link to post
Share on other sites
Guest anguscanplay
No

not that then - you want me to come have a look ?

Share this post


Link to post
Share on other sites
not that then - you want me to come have a look ?

I need someone to take a look lol. I was gonna contact the company that installed it in the hope they would be familiar with the system, however it is date stamped 11 years ago so they probably don't remember it anyway.

How much do you charge? Feel free to PM me if you don't want to reveal that on here :)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.