imroberts Posted February 23, 2008 Share Posted February 23, 2008 I have recently disconnected and reconnected a couple of sensors due to decorating and have since been unable to set my alarm. As soon as I start to enter the code the control panel starts beeping, and will continue beeping until I press # and wait a few seconds. I'm guessing this has locked me out due to something I've done wrong... can anyone tell me why or how I can resolve this? Link to comment Share on other sites More sharing options...
billythebellbox Posted February 23, 2008 Share Posted February 23, 2008 put your circuit & fuse back together as they where De Do Do Do, De Da Da Da. De Do Do Do, De Da Da Da Link to comment Share on other sites More sharing options...
camerabloke Posted February 23, 2008 Share Posted February 23, 2008 well done billy Eucam Security Systems 0845 4630 746 www.eucam.co.uk Link to comment Share on other sites More sharing options...
imroberts Posted February 23, 2008 Author Share Posted February 23, 2008 put your circuit & fuse back together as they where Everything is back as it was, still the same problem Link to comment Share on other sites More sharing options...
Guest anguscanplay Posted February 23, 2008 Share Posted February 23, 2008 Everything is back as it was, still the same problem obviously not back as was then - do you have a test meter ? billy - why do you have a Police record .... ...as a siggy Link to comment Share on other sites More sharing options...
imroberts Posted February 23, 2008 Author Share Posted February 23, 2008 obviously not back as was then - do you have a test meter ? All the wiring is back as it was. The alarm isn't operating though. It doesn't even set off the tamper alarm if things are tampered with, it's as if it has switched off all monitoring. And yes, I have a test meter Link to comment Share on other sites More sharing options...
billythebellbox Posted February 23, 2008 Share Posted February 23, 2008 All the wiring is back as it was. The alarm isn't operating though. It doesn't even set off the tamper alarm if things are tampered with, it's as if it has switched off all monitoring.And yes, I have a test meter endstation?billy - why do you have a Police record ....its all I want to say to you De Do Do Do, De Da Da Da. De Do Do Do, De Da Da Da Link to comment Share on other sites More sharing options...
imroberts Posted February 23, 2008 Author Share Posted February 23, 2008 endstation? Pardon? Link to comment Share on other sites More sharing options...
black knight Posted February 24, 2008 Share Posted February 24, 2008 try pressing your code and * - it probably just needs a reset (code + star (*) = reset.) Assuming that your TAMP (tamper) light is,nt still illiminated that will clear the system. paul THE BLACK KNIGHT "Any comments / opinions posted are my opinion only and do not represent those of my employer or Company." Link to comment Share on other sites More sharing options...
billythebellbox Posted February 24, 2008 Share Posted February 24, 2008 try pressing your code and * - it probably just needs a reset (code + star (*) = reset.)Assuming that your TAMP (tamper) light is,nt still illiminated that will clear the system. paul code + star is reset code + # is reset ???? De Do Do Do, De Da Da Da. De Do Do Do, De Da Da Da Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.