Jump to content
Security Installer Community

Pet Immunity Sensor Help


Guest jsrazor

Recommended Posts

Guest jsrazor

I have two dogs (about 60# each). I have the DSC Bravo 6 Dual sensor which claims to be immune to pets up to 80#. It is mounted at about 8' (recommended 7.5-10') I removed the #3 Jumper (recommended for harsh environments - ie multiple dogs etc...). I have tried adjusting the vertical adjustment up and down. No matter what I do even one of the dogs in the room will trigger the sensor. I am wondering if anyone has any suggestions?

Link to comment
Share on other sites

Ive just downloaded and viewed the manual, seems to me youve installed, and configured the device correctly.

Perhaps its a faulty unit ?

Is it mounted on a wall in the corner at ceiling height, or on a bracket. ? If its on a bracket it must be mounted at 90 degrees to the ceiling, not angled downwards.

........................................................

Dave Partridge (Romec Service Engineer)

Link to comment
Share on other sites

  • 3 weeks later...

Try the Visonic K9 pir. It has never given me any problems and my supplier says its their best seller.

Service Engineer

My opinions may not reflect those of my employer, managers, colleagues, customers, friends, family or pet rabbit.

Link to comment
Share on other sites

Guest THOMSONSECURITY

Hows about a little (secret secret) sheilding ;)

Nice bit of electricians tape (on the inside) should do the trick........ :huh:

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.