mcguiganp Posted July 10, 2007 Share Posted July 10, 2007 Hi all, first post so please be gentle As the title suggests I've recently moved house and am looking to replace the faulty C&K 700L panel with a Texecom Premier 48 panel. My question is related to the bellbox. The connections on the C&K panel are as follows, -R -ve +ve -S -ST I assume the -ST is the strobe and the -S is the bell, the -R the tamper? The Texecom panel has, +12v, Bell -, Tamp, 0V, Strb- Will wiring it up the following way be ok? -R to Tamp, -ve to 0V, +ve to +12v, -S to bell, -ST to Strb. Also, what is the best way to disconnect the bell so that it won't ring all day until I fully connect up the new panel. EDIT Please do not post bell silencing information in the public forum. anyone can see Thanks in advance. Link to comment Share on other sites More sharing options...
dpaengineer Posted July 10, 2007 Share Posted July 10, 2007 Those connections look right to me mate. Bit dodgy giving 'bell silincing' info out on public forum, but what you say is 1 method. another requires a ladder and the 3rd i'm affraid I cant tell you. Trade Member Link to comment Share on other sites More sharing options...
mcguiganp Posted July 10, 2007 Author Share Posted July 10, 2007 Those connections look right to me mate. Bit dodgy giving 'bell silincing' info out on public forum, but what you say is 1 method. another requires a ladder and the 3rd i'm affraid I cant tell you. Thanks for that. EDIT Please do not post bell silencing information in the public forum. anyone can see I think I'll just have to hack off the new neighbours for 20 mins. Thanks for the help Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.