Jump to content
Security Installer Community

Guardall Px Pin Of The Day


mark hills

Recommended Posts

I am due to take over a CHUBB system and I understand they operate a pin of the day system that cant be defaulted to normal 'single engineering code' operation. Does anyone know if the software can be replaced/upgraded so it will operate as a standard px panel. I am aware that these systems are usualy rented but my customer has a letter from Chubb stating that he now owns the panel etc. Any help will be much apprecieated.

Visit our website www.alarmsonline.co.uk

Link to post
Share on other sites
I am due to take over a CHUBB system and I understand they operate a pin of the day system that cant be defaulted to normal 'single engineering code' operation. Does anyone know if the software can be replaced/upgraded so it will operate as a standard px panel. I am aware that these systems are usualy rented but my customer has a letter from Chubb stating that he now owns the panel etc. Any help will be much apprecieated.

The panel will need to be flash upgraded, so unless you have the kit to do this then it maybe cheaper to replace the panel ;)

There are no stupid questions, but there are a LOT of inquisitive idiots.

Link to post
Share on other sites
The panel will need to be flash upgraded, so unless you have the kit to do this then it maybe cheaper to replace the panel ;)

Thanks J.Paul, not being too familiar with these panels, is the flash upgrade via a laptop and lead? or is there some rediculously expensive peice of custom kit required?

Visit our website www.alarmsonline.co.uk

Link to post
Share on other sites

Goodo as we can be moe helpful once your part of the gang.

See you trade side soon then.

Adi

I really can't be ar**** with it anymore.

Link to post
Share on other sites
I think they should give you a written test to establish wether you are legit trade

Perhaps we could introduce a semi-basic questionaire as a part of the application.

........................................................

Dave Partridge (Romec Service Engineer)

Link to post
Share on other sites
  • 4 years later...

I am due to take over a CHUBB system and I understand they operate a pin of the day system that cant be defaulted to normal 'single engineering code' operation. Does anyone know if the software can be replaced/upgraded so it will operate as a standard px panel. I am aware that these systems are usualy rented but my customer has a letter from Chubb stating that he now owns the panel etc. Any help will be much apprecieated.

If you press the ? and take the produce ID begins with W, then contact Guardall My link and request the commeral software for the panel. You will then need Kanda AVR to flash. This then removes the Pin of the Day.

Link to post
Share on other sites
  • 3 months later...
Guest Phil Evans

I guess that depends on what you class as expensive, �65+VAT for a lead seems a bit excessive to me. Turns out I can get past this problem without flashing the panel so �65 in my pocket :rolleyes:

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.