Search the Community
Showing results for tags 'setting'.
-
Hi all, I would really appreciate a bit of help here please.I have an alarm box is an ademco xpc microtech accord 8 with the keypad as pictured. I had to switch the power off at the circuit breaker and later that night when I went to set the alarm to the "Night Set" (Easy Set 3) it beeped 3 times and never set.After testing this more, it turns out the "Full Set" (Easy Set 1) doesn't work either, it gives the 3 beeps. When it was working you would hear 2 beeps and set but now you hear 3 beeps but doesn't set.I noticed that if I try and set it by entering the code and then 1 for full set or the code and then 3 for night set the alarm shows that zone 8 is tripping.The interesting thing is I don't have a zone 8! Could this be a battery fault or something else? Any tips would be amazing.The call out charge for an alarm guy locally is £150 which I don't have at the moment.Thanks.
-
Just made this, showing the importance of setting an alarm
Gabs posted a gallery image in Members Gallery
- 10 comments
-
- led keypad
- burglar
-
(and 2 more)
Tagged with:
-
Hi everyone, I live in a rented house fitted with an Optima Compact G3 alarm. We've never used the alarm since living here and weren't supplied with a code by the landlord. Until now all the lights on the alarm have been green. This evening we had a power cut which has caused the alarm to change. We were out when the power cut happened so don't know if it made a sound, but the outside box is flashing and the display now has red lights next to 'Tamper' and 'Power' (see photo). We did consider pressing the reset button but were reluctant to this this incase this caused the alarm to go off, which we don't want to happen as we wouldn't know how to stop it! Is there a simple solution to getting this sorted without getting our landlord involved. Sorry if this seems like a silly question, it's our first house and we're not really sure what to do Any help and advice greatly appreciated! Thanks, Amy Also the buttons in the photo aren't that clear (the say Chime, Omit, Reset, Programme, Set)
- 2 replies
-
- optima
- burglar alarm
-
(and 3 more)
Tagged with:
-
hello there im an engineer from peterborough and have been called to an issue wit ha karisma id system. the display is an 8 bit display instead of the lcd one. i need the alarm to give a confirmed set tone at the end of the exit tone. according to the customer it did it once upon a time but stopped working after the alarm was factory reset when he lost his codes and i didnt have access to the engineer code. the system is now all working except for this exit confirmation. from what i can see it must be an output programming option but i cant figure out how to do it. If anyone has any experience with these alarms can i please have some advice thanks