Steve 1968 Smith
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by Steve 1968 Smith
-
-
Many thanks for your advice, and for al-yeti's. The main system case is square. You've been great, I think I've got enough info to give it a go! Biggest faff is running the wire across the house. Thanks again for your quick and insightful responses :) Steve
56 minutes ago, datadiffusion said:I am guessing you have a 9752 or 9853 - is it a square main system case or an oblong one?
The 9930 keypad is obselete, but a 9941 or better yet 9943 if you want fob will do the same job.
You'll have to wire the keypad, of which you can have 4, back to the nearest other keypad, expander, or the panel.
The keypad only uses 4 wires so assuming it's all done in 6 or 8 core wire, you could use the spare, as long as
they aren't already in use, for the EOL door contact.
Or, as it's already a wireless system, add another wireless door contact? Even the newest Eaton slim RF door contact will work with an
older system.
(You could even add an expander if you are wiring to the nearest expander or keypad, but seems a lot for just one zone, and it would have to
be the larger 9853 system for there to be 'room' for it)
-
Good point. The manual says 9x5x, but having looked closer it says 9853/9752/9751..
-
Thanks for that - we've got 2 radio expanders fitted (all the PIRs are wireless) - can I link to spare channels wirelessly?
-
Anybody able to advise? We currently have 2 entry/exits with 9930s but have a 3rd entrance where we'd like to fit another keypad and create a 3rd entry/exit. Is it possible? And is there a way of doing this 3rd entry/exit without cabling back to the 9651? Cheers, Steve
Can you add a third 9930 to a Scantronic 9651?
in !!..DIY Installers..!!
Posted
Many thanks @datadiffusion, finally got around to doing this on my 9752, fitting a 3rd keypad and a wired door contact as you suggested. Your advice much appreciated :)