KWCFC
-
Posts
29 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by KWCFC
-
-
I converted to security about 6 years ago after being a sparks... I do prefer it but best advice I can give you is make sure you learn as much as you can from your colleagues as the information isn't as widely available on the Internet as it is for sparks. If it's just intruder alarms then there's not much to worry about but it does get complicated if you need to integrate it with CCTV and access control etc on a large commercial.
As for what's the best intruder alarm... There isn't one. If you asked 5 different alarm engineers what the best panel is they will name 5 different brands. Alarm engineers tend to fit the brands that they are experienced in and know inside out. The actual concept of an alarm is the same amongst all the brands but they all have their own menu setups and characteristics.
-
2
-
-
Thanks guys much appreciated.
-
Hi guys a bit of background.
Got sent to a bowls clubs a few months ago to replace a Digi with a speech dialler as they don't want to pay the monitoring anymore and nothing valuable in there anyway. No problem is fitted the speech dialler and used the phone line supplying the digi for the dialler.
I've now get a job on my diary next week saying that a BT engineer has disconnected the phone line for the dialler saying its not compliant due to "star wiring".
Anyone know what he's on about?? The wiring itself was likely installed about 20 years ago by a long retired engineer... Its never been picked up before.
-
Yeah I agree fellas. Lesson learnt.
-
1
-
-
It's CQR contact but I jumped the gun a bit guys. I got a callout to a tamper fault and assumed it was this door contact again... Turned out it was SAB tamper.. Doh!
-
Hi guys I've got grade 3 site where the door contact on the automatic door keeps going into tamper - contact has been changed.
The doors are metal, does the contact or magnet require spacing to stop magnetic interference?
The contact and the magnet are also fitted quite close together, I heard someone suggest a while back that on grade 3 contacts there should be a bit of space between the magnet and contact.
-
Looking to buy one of these, anyone recommend any?
-
9 hours ago, Amps said:
They need to be installed at 2.1 meters rather than 2.4 meters for the standard pir’s.
Yeah I noticed they worked better lower down but that's still no good on a domestic. They need to be near the ceiling else it looks poor in my opinion
-
9 hours ago, petrolhead said:
true, but if you cut the top bar off the pet mask they are a lot more sensitive but still tolerate pets.
nothong comes close to the bosch for being sensitive while still disregarding pets though.
Yeah I was actually told that by Pyronix tech support when I first fitted them and struggled to walk test. A bit of a **** design if you have to do that ain't it
-
Anyone have any more info on this kit?
Guy I work with raves about Uniview and the images he showed me on his phone do look very good.
They seem to offer a better value for money compared to the other products.
-
The wireless Pyronix pet sensors you have to do two backflips and a cartwheel for the bloody things to detect movement.
-
Hi gents
Tried to connect my laptop to a Euro 76 panel today. Got an error message on castle insight saying something along the lines of "panel won't initialise".
They have a building across the road with a separate system but the same alarm and I connected to that fine so don't think it's do with any of my laptop settings.
Just seeing if anyone knows how to fix this? I'm going back tomorrow to program 120 new fobs with different areas and access and really don't fancy doing them from the keypad!
-
1 hour ago, sixwheeledbeast said:
Breakglass is not ideal detection.
Settings on the tester should allow you to check flex and smash.
Are you using the setting where you tap the surface with the tester and the smash follows?
Yeah I've tried that but still the same result. Flashing green LED.
-
On the ceiling in front of the windows, well within the 7 meters specified in the instructions.
-
Hi guys
I fitted 2 breakglass detectors in an office on Friday the detectors are Honeywell flexguard FG-1625TAS
I don't have much experience in installing these but I had issues with the sensors when if came to testing them at the end.
I was using the FG-701 breakglass tester as specified in the instructions but I am struggling to get the red LED on the detector to indicate it has detected an alarm.
I put the detector into test mode as per the instructions but when I activate the tester I just seem to get the flickering green LED. Apparently that means it has detected audio but hasnt gone into an alarm condition?
Any advice would be great.
-
I don't understand why galaxy have the "high resistance" fault function? We use castle and it either works or it doesn't... I dont see the advantage.
-
1 hour ago, PeterJames said:
Ive upgraded you Kyle just bear in mind how quick I sorted your trade application next time Im in ordering my Zinger Tower Meal
Haha thanks Peter. I'll be sure to send my staff discount!
-
On 27/01/2018 at 15:43, norman said:
Hello and welcome, have a read of the forum rules and how to apply for trade membership, there is a lot of great information over on that side of the forum that is not viewable to the public.
I've applied for trade access, hopefully I meet the requirements!
-
Started from school as an apprentice electrician. Then got laid off as soon as I qualified. (Normal practice for them, just want cheap labour)
I then got offered a place at the security company where I currently work who were happy to train me and send me to college etc while still paying a decent wage. Definitely best thing I've done.
I get a lot more satisfaction from installing a monitored alarm than I do from fitting lights and sockets. Although I hate domestic!
-
Welcome!
-
2 hours ago, norman said:
Hello and welcome, have a read of the forum rules and how to apply for trade membership, there is a lot of great information over on that side of the forum that is not viewable to the public.
Thank you. I will apply as soon as I hit the 5 post count as the rules state.
-
2 hours ago, goncall said:
honeywell do a wireless dual tec
And Pyronix
-
Just introducing myself.
I'm a 24 year old electrician from Lincolnshire who got a job with a security company about 3 years ago and very much enjoying this type of work.
I've signed up to hopefully learn a bit and improve my knowledge. As much as I think I have learned a hell of a lot over the last 3 years I still feel I'm a bit clueless and have plenty to learn. Especially with the IT side of things!
-
10 hours ago, Alex161 said:
I just feel it unnessasary to pay out about £380 for a new system for my garage when the existing one works.
If it hasn't been serviced how do you know it works? Just because it's not making noises doesn't mean it works.
Scantronic 8136
in Members Lounge (Public)
Posted
Hi guys been having some issues with this panel, it seems a bit different from most scannys I've worked on.
I'm trying to send a confirmed alarm on this panel but it's in an occupied building. My first issue is trying to set 2 zones to a seperate area, in the programming menu it appears I can only set area numbers rather than the usual A, B, C, D. (Unless I'm doing something wrong)
2nd problem is when I try to set a particular area that isn't the default one I get the "areas can't be accessed" come up on the keypad.
Any help greatly appreciated!