Alarmbloke
-
Posts
18 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by Alarmbloke
-
-
26 minutes ago, MrHappy said:
you installing double pole circuit ?
No, Eol,
Was talking twisting spare pair, for closed loop
-
Just found downloader after hours of searching,
Need a sit down now!!!
-
On 03/03/2020 at 20:54, tinnitus said:
Hi guys,
can you help settle an argument? Is it an nsi gold requirement that the engineer code be changed when an employee (engineer) leaves the company? Or is it just good practice? Also, should it be changed annually?
thanks in advance.
I dont see the point to a certain extent,when most panels, with a competent engineer can default,change engineer codes if wanted to take over, so even if companys hide or constantly change codes, seems a big loss of hours
-
On 23/04/2020 at 23:16, al-yeti said:
All grade 3 must be anti mask?
What if you are adding kit to the grade 3 system that isnt grade 3? Perimeter beams for instance? Told its ok we need to right a deviation, makes no sense to me where someone can open a grd3 door contact then break an ungraded beam, ? Is this still a confirmed alarm
-
I wouldnt use another make, contact door entry direct they are great,get a replacment,
-
Hi guys, when i commission an intruder alarm i always take a closed loop cable resistance for every detector, but have been "advised"!!!?
By another engineer that he has spoken to inspectors who have told him that its fine to just record the zone, tamper res from the zone,ie whats shown on the keypad, i feel somones being a little idle,
Would love to see your views on this,and if anyone else feels this is also ok,?
-
Does anyone know if this little programme is still available to download?
-
i have been asked by a customer if there is any kind of pc based software to use as intercom from an ip call station located on the LAN , we have used Grandstream but these all appear to use there android based phones and im unsure if you could install it on a phone as an app ? dont know why you couldnt ? has any one seen or heard of such a product ?
-
can you take controller to known working door controller and connect directly , establish cable faults distance etc ? we have used the ip controllers you have to prog locally with laptop. then there was a setting you have to added it as then deleate/ reconcfig to get working !!
-
need program that can see the xml text coming out of a galaxy panel on the IP Module , !!!!
-
oh ok like that is it
-
is anyone else using mirasys NVR's , if so any luck capturing Galaxy Alarms ?
-
many thanks , have e-mailed info
Thanks
-
ok please advise how i do that ?
-
oooppsss ok sorry ,, noting to do with http://thefireandsecurityinstaller.com/ then !!!!!
-
is it possible to reset the eng codes for the larger eusec panel think its the 1025 ? i only have the eng manual for the 46 and cant see any ref to defaulting the code ?
-
was on the old security installer site for years and just found out site has been removed so looks like starting all over again ....
Hello All
Grade 3
in Members Lounge (Public)
Posted
Yes i understand that, im talking kit that cant be graded,
We done a job and had to fit perimeter beams around perimeter, because the beams where not graded, we where told we could keep at as grd3 but need to do a deviation explaining no other devices at a graded level where available,
Also finding some breakglass detectors are xlaiming ro be g3 by there model number but are infact grade 2 etc