Jump to content
Security Installer Community

breff

Trade Full Member
  • Posts

    3,112
  • Joined

  • Last visited

  • Days Won

    19

Everything posted by breff

  1. Take factory fited wire out of msw2 and join to a spare core in the cable to that bell leaving nothing connected to msw2, join that core to a spare core in the other bell cable at your panel then wire that in to msw1 along with the factory fitted wire on the other bell
  2. I bet the bit of rolled up tape has fallen out
  3. Can VCL domes do pelco p or d? If so get a rx10x from BBV In fact I just looked and the rx10x can do VCL 485 anyway
  4. Or how not to, shouldn't be mounted sideways, antennas should be kept in same orientation as receiver, can lose 60% signal just by doing that
  5. Bet it was a Menvier TS and it was a NIB
  6. Have you tried another camera in the same location. I cant see how anything to do with earths or phases can be a problem once converted to ip unless there is a cable issue with the coax (assuming you are still using it and the converters are for sending ip over coax)
  7. Visonic Powermax, stupid talking, stupid manual, stupid panel
  8. http://www.systemq.com/cgi-bin/commerce.exe?search=action&category=3540&keywords=all
  9. You havent mixed up 0v hold off with 0v trigger have you?
  10. Turn the two white plastic slots and the inserts will come out revealing screws. You will not be able to connect with Wintex unless you know the engineer code or UDL code, The panel may also be locked and have engineer reset for tamper conditions turned on, if this is so you will render your system inoperative by removing the cover. I would advise you get the installing company to return to do your additions.
  11. Was going to say that previously it was 554-557, when they added android/iphone they added 558 PS surely I deserve a +1.....
  12. Ipolis, works fine, software on the machine must be above 1.03 IIRC, http port is 80, rtsp port is 554. Ports 80 and 554-558 TCP need forwarding through your router to access remotely. You will need at least a 3g signal for it to work as well
  13. I would do the same Aaron, however, sounds like OP wants to be 'diplomatic'
  14. How much is the difference between the repair price and the annual maintenance fee that you would have had? If not much I would suggest to the client that he pay the maintenance fee and then has x months remaining.
  15. 43 downloads

    Some helpful information about resetting passwords and changing hard drives on dedicated micros dvrs
  16. Nothing wrong with staple guns in the right hands, I've got a coax staple gun as well, very handy.
  17. to switch from one option to another you must close the existing option by clicking the underlined close at the bottom So there was nothing wrong with the upload it seems
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.