-
Posts
1,692 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by timmo66
-
-
old version used to take you straight to the point where the posts were unread, you have to scroll from the top on this one and find where you left of?
-
forum member?
-
it's never been a stumbling block for me before - if it's ever been discussed, most clients are okay with it on the basis that we are then solely responsible for one of the most important parts of the system. they make sure we have a phone line or LAN for the back up and everything else is down to us.
-
Never dealt with a police monitored intruder alarm from a company point of view - only installation so I have a few questions...
- A site being taken over with existing Emizon kit - can this be reused and is considered the customers? I'm thinking this depends on the contract in place.
If not owned by the outgoing maintenance company you can transfer the signalling to your ARC of choice.
- Does the new company have to re apply for a URN or does this stay with the building?
Reapply as a new maintainer, but the existing URN remains in place.
- I'm presuming the local authority has to be informed by the new installer?
Yes, as above.
...
-
Intruder and CCTV mainly at the minute, but NSI gold for all disciplines and BAFE.
-
I am based in Newark.
Post a couple more times and then PM me your details.
-
Sorry, I meant how close are you to Lincoln?
-
-
bit like one of these?
Pub by any chance?
-
9853 used to be our straight 9800 swap, same PCB mounting points etc and similar terminal positions.
Mostly it's the 9651 now.
-
So you sold them a 99p chip for the next 10 years
Funny you should mention that.........
-
Two of our 9800 estate have gone down this week with NVM fail - not bad going seeing as they've been installed since it came out.
-
That's a good point actually and sorry to hijack.
Have you installed wifi cameras, with NVR before?
This would work well on a project I am looking at.
-
mine provides his own sundries as part of his rate
-
I had exactly the same issue, wish they would have HDMI, BNC & VGA outputs so you would have plenty of options
7300 series has all these.
-
I've always wondered who you guys contacted for me because no body took the piss at work lol
-
Peter, query from customer....
"Do the fobs use a static or dynamic token?"
I assume the answer is static as there is a preprogrammed ID that remains the same each time you present it? Or have I got the wrong end of the stick?
-
what are the standard net2 readers? i only use p50 or the bigger ones
-
I only know by fluke. Accidentally programmed a switch2 fob.
Peters fobs work with Net2 too by the way, if you buy from him.
-
switch2 works with Net2, just not the other way around
-
Yep P50 readers.
I tried it and it works. Use my blue fob to get through the net2 door and then unset the alarm.
-
If it helps, Peters fobs that work with Scantronic/Menvier/Galaxy, work with Paxton.
-
Yeah, ADT are still pretty lapse with stock and plant control now.
Yep, see loads of subbies with ADT ladders
-
ahh, bit of wood in the way there.
I have rounded off my fair share of terminal screwdrivers while cutting a little channel into the ceiling, slotting the cable in and filling in...
Vacancy Newark Notts area
in Security Job Requests and Vacancies
Posted
Any one local to Newark or within 30 minutes of it and looking for a change of scenary, please drop me a PM.
We have an engineering opportunity within the company.
Cheers.