Jump to content
Security Installer Community

goncall

Trade Full Member
 View Profile  See their activity

  • Posts

    9,216

  • Joined

  • Last visited

  • Days Won

    118

 Content Type 

Everything posted by goncall

  1. goncall
    possibly an old pressure mat hence the joints when system was upgraded ,cable seems in good condition considering the age not rough at all was normal in those days
  2. goncall
    Ademco something
  3. goncall
    When used with an old racal panel,quite common back in the day
  4. goncall
    old racal didnt they use to have a strange 2 wire thing pos alarm and neg tamper
  5. goncall
    The co seems to be doing things by the book tbf there replaced the panel etc they have offered maybe gsm or red sec on radio for no extra not sure why the phone bills would be excessive as there's no need for op/cl etc and if keyholder only no need for 24hr test maybe the signals are being aborted via the arc
  6. goncall
    More Shaz and Tracey
  7. goncall
    I've got fingers in a couple of pies..
  8. goncall
    I do like fitting it back to the wall,makes me feel like an engineer
  9. goncall
    I just fit them then wait for the engineers to break them...
  10. goncall
    I just fix things
  11. goncall
    There's fitters and there's engineers ..........
  12. goncall
    Just connect a wire from gnd on the expander to gnd on the panel that will fix it..
  13. goncall
    Presuming a line fault that won't reset he might of meant only a single wire coming in on line either a leg or b leg dis
  14. goncall
    Depends on the device are they mr501 or mr901 501 bases can cause problems a 901 base won't
  15. goncall
    if you've changed ion to hpo you will have to change programming in consys or you will get id faults, also any faulty device on the loop can cause low and high id faults on other devices, a faulty mcp causing id faults is common only way to prove is to discon one device at a time and link the loop thru and check the levels unless you have a shorting device which speeds up the process its a pain of a fault to trace
  16. goncall
    hard wired or wireless
  17. goncall
    You should have bought a snooper instead of a dash cam mate,
  18. goncall
    swerve them imo,what next supply your own ppe,can you wait for your wages etc
  19. goncall
    it was a thought not an application
  20. goncall
    split trade thread required
  21. goncall
    it's says jimmy edited,or are you as one now...
  22. goncall
    It appears so..
  23. goncall
    I've heard they even have there own tune which was playing when they met..
  24. goncall
    Must of had some ropey mates if jimmy is one of his best..
  25. goncall
    Its new order,they don't do bad ones..
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept