Jump to content
Security Installer Community

aissecur

Trade Full Member
  • Posts

    302
  • Joined

  • Last visited

  • Days Won

    5

Posts posted by aissecur

  1. Hi, first point to note the battery (if checked and maintained) should last more than a few hours without mains power to the control panel 

     

    If you have fully drained the battery then when you have switched the power back on to the unit it may of blown the quick blow fuse (next to the transformer) I think this is 125ma (but it does say on the label) l

    if you are electrically competent & know what you are doing you could check this  First 

     

    if not call the experts 

  2. Best to call In an alarm engineer to check your system over 

    its highly likely there is a major issue with your alarm, even if you did manage to get the keypad working you still would not know if everything was functioning correctly.

    I appreciate it’s an expense but better this than find out the hard way and it not work if you get broken into 

     

  3. As previous suggestions, either upgrade or get it checked over by a security installer,

    just think if you DIY it & you don’t configure something correctly or it fails to work because it has a undiagnosed issue when it needs to then you will kicking yourself (false economy) 

     

  4. If you nvr / dvr says off line then as the others have illuded to, it’s a likely an ISP issue 

     

    can you send us a screen shot ? 

     

    how was your system set up? Did the installer scan the qr code with the hik app  or is it set up by DNS ? 
     

    Did someone install the system for you or is it a DIY install by yourself ? 

  5. Never seen that - I think it was possibly lyntec many many years ago had a problem with fires in bell boxes but may be wrong -  (I think that was down to the strobe / capacitor) 

     

    I suggest in this instance the bell suffered moisture or water ingress that in turn has shorted the battery out, with no over current protection on the battery it has shorted causing excessive heat / damage 

     

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.