Jump to content
Security Installer Community

al-yeti

Trade Full Member
  • Posts

    9,096
  • Joined

  • Last visited

  • Days Won

    115

Everything posted by al-yeti

  1. Why do these nuttas insist on taking the fire and forcing into the terminals Is it a compliance thing?
  2. Ignore residential market? Enforcer is what they went with...
  3. Depends what your paying for at £90 a year , ultimately seeing both contracts in the flesh would make things clear? You can remove your details of course ....
  4. It's not that cheap, better pay slightly more right?
  5. Your missing something Adt normally quote you to come and do that , and you probably don't want to pay that right? You don't have much choice on the matter
  6. You know they still won't attend unless call out paid for in advance ??? and they turn up and say sorry we can't deal with it The stuff seems to work from new as so much of it still goes in, but after that I think most subs stop paying for repairs and it makes things worse
  7. Replace it with another model , to risky to touch risco
  8. Dude easily solved remove the sounder wires Add a speaker to the speaker terminals and it will give you something similar for now
  9. What particular bell and strobe are using ?
  10. Yes it was a long shot I was thinking maybe internal siren on an output changed from something
  11. Check how the internal sounder is wired ? What connections is it going to? I assume.leypad.jist shows model and date time with no errors? When unset and sounder activating
  12. What siren and strobe You could use an 8core , keep the power to Rio from the keypad power and the separate power for the strobe and siren
  13. This happened on windows 10 aswell , you need to mess about with drivers and windows settings , I don't really know why it happened to me but flaffed around and got into work in the past So glad I don't have to use RSS anymore
  14. Your engineer code is different from what your trying
  15. Well seems seems the panel uses a common and then zone legs With the flex you can use two wires for power plus and minus , and then two wires for the zone What pirs are you using , perhaps a picture of those aswell will be helpful, Did you get a resistor pack with the flex 100? Those may or may not need to be installed in the pir
  16. Manual would have been better to use Board is cheap and available
  17. Weird how some bells will ring for days on there internal battery lol
  18. I didn't think they were 12v cos they run in scb mode and stay lit when power removed from memory , maybe they are lower voltage from bell when 12v is gone from panel
  19. 80% of market ? Meaning manufacturers?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.