morgan306

I too had a go with the push notifications but didn't receive anything. Must admit it was a rushed attempt but I'm sure everything was configured correctly. That was on a 520 v6.78.

Say pins on a Galaxy for arguements sake.

On an PD6662/EN50131 system, if the system is activated followed by a tamper, would it send an intruder, followed by confirmed, or intruder then tamper? I think confirmed, but I'd like to be sure as I have a grading exam tomorrow. !

If you're back feeding 12v from smart RIO's to the panel, then that is another issue you need to resolve! Also, double check line fail is disabled, menu 56/1/10. Check line volts,incoming call etc are all disabled, then go into perameters 51, and do a restart.

Paul, get the Galaxy G2 and Galaxy Guy's SelfMon app. If you can't stretch to getting a professional in to install, then get your sparky friend to do it. Just ensure that he runs alarm cables separate to mains, sites detectors in sensible places(not looking out of windows, above radiators etc). I personally wouldn't site the panel above the entry door, as I think they should be in a discrete location, but it's up to you. Don't forget to run a cat5 cable from your router to the panel too, for the Ethernet module.