Service Engineer
-
Posts
5,241 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by Service Engineer
-
-
Hi Guys,
I ve spent hours looking for a supplier for "8 core + screened audio direct burial cable" as shown in attached picture.
Anyone able to suggest a supplier, I'm just about to give up.
-
Hows about doin an iphone version james ?
-
If simillar to the one above (That's a Challenger VIII), then it's Code then # key to reset.
-
I only have the 1000 and 1600 manuals, dunno if they'd be of any use.?
1600 Code change Instructions:
If anyone does have the 1500 manual(s) please upload them.?
-
My 1st install was an early Gardtec 580..??? The 1st type with the hard round buttons.
-
RS 485 bus allowing 8 wireless transmitter zonesand 8 wireless keyfobs
9 e.o.l zones or zone doubling feature providing
16 zones on board
All zones fully programmable
300 event log
32 character LCD Remote Keypad
15 user codes
Up to 4 remote keypads
Alert Keys for PA/Fire on Keypad
Programmable chime function
2 programmable outputs
Strobe confirmation
Service Timer option
1 Amp Power Supply
-
Added and Stickied..
-
Application Recieved & Installer manual sent via email..
Welcome to the Forums Peter.
-
Looks like 4.36 is possibly a step backwards.
They did I believe have confirmation problems with 4.36, hense issuing thousands of updated chips to ADT with a version of 4.37.
-
Customer Advice Note
Galaxy 8, 18, 60, 128, 500, 504 & 512
Software Version 4.39
Functional Change Details
(with reference to V4.36)
February 2004
Changes introduced in V4.39Galaxy V4.39 has been developed as part of a software standardisation process, designed to
bring all variants of the Galaxy panel software to a single version. This will allow Honeywell
Security (previously Ademco Microtech) to better support and develop the Galaxy software
moving forward. With regard to the UK variants of the Galaxy, there is no change in the
Galaxy product functionality, between V4.36 and V4.39.
Upgrade Compatibility
V4.39 software can be fitted to any Galaxy panel that meets the criteria indicated in the table below.
Panel Type - H/W Revision - S/W Revision
Galaxy 8 - Rev 1.5 and above - V1.18, V1.25, V1.27, V1.30, V2.xx, V4.xx
Galaxy 18 - Rev 1.72 - V4.xx
Galaxy 60 - Rev 1.72 - V4.xx
Galaxy 128 - Rev 2.0 and above - V2.xx, V4.xx
Galaxy 500 - Rev 1.5 and above - V1.18, V1.25, V1.27, V1.30, V2.xx, V4.xx
Galaxy 504 - Rev 2.0 and above - V2.xx, V4.xx
Galaxy 512 - Rev 1.5 and above - V1.18, V1.25, V1.27, V1.30, V2.xx, V4.xx
Allso -
Its in Adobe PDF format so I can't cut and paste.
Send it me: dave@dlp-1.com and ill do it..
-
Here are the 1st points of reference for all those DIY alarm installers out there.
This 1st page is a brief guide explaining considerations prior to commencing an installation.
And this page is a quick guide to servicing your DIY installed system.
A Guide to Self-Servicing your Home Alarm System
A Glossary of common abbreviations used in our Security Industry.
Security - Glossary of Abbreviations
Please do not attempt any work you are not competent to undertake.
-
Thats a Great story.....
-
The cable you cut must have been to a powered detector, so you have blown the control panels 1A 20mm fast blow fuse, this is why the panel wont reset and still shows a tamper fault.
Youll need to replace the AUX fuse to get the panel working again, or call an engineer to get the system serviced (He`ll sort out the problem while servicing the system) and advise you of any other causes for concern, such as a dead battery. etc etc.
-
The old Bently 133 and Symphony are two panels im quite fond of, my old employer had fitted hundreds of these before i started and he swore by them.
Ive only ever replaced one because it was faulty, any others ive replaced have been due to upgrading.
The build quality of these Bentleys was great, its no wonder they seem to last forever.
-
And here`s the 350+ Quick start user guide.
-
It cant be a 360 because their isnt one, so im pressuming you mean a 350/370 or 580.
Simply though the 580 control panel has a sloping front where the keypad and display is located, the 370 control panel is a smaller box about 10"x8" and doesnt slope.
Here`s the manual.
-
The attached user instructions below should help you out, allthough they are for the old Optima XM, the features are the same.
-
Seems Novor Electronic Devices have purchased ADE.
HERES THERE DETAILS:
Contact Details
Novar Electrical Devices and Systems,
The Arnold Centre,
Paycocke Road,
Basildon,
Essex, SS14 3EA
Tel: +44 (0) 1268 563000
Fax: +44 (0) 1268 563563
EMail: more@novar-eds.com
For literature requests call:
Ackermann 0870 240 3391
ADE 0870 240 3387
Bardic 0870 240 3389
Friedland 0870 240 3390
MK Electric 0870 240 3385
-
Just emailed you some manuals, let me know if there the right ones.
-
ADE,
Southgate Way,
Orton Southgate,
Peterborough,
PE2 6YG.
Telephone: 01733 452 000
Technical Support 0151 549 1550
-
Its on the way pep.
-
I`ve emailed you the manual.
Allso
8 Core + Audio cable
in Members Lounge (Public)
Posted
The cable im after is direct burial 8 core + shielded audio. Its proving very difficult to find any supplier.