Jump to content
Security Installer Community

Accenta G4 Issues


Recommended Posts

Hi, I'm having Issues with my Accenta G4 and all its doing is the RKP is just displaying Accent G4 RKP F131-01-111 I have 6 zones in use and all pirs are the Pyronix Equinox pirs and 1 of them is above the keypad in the corner of my hallway by the front door. would it be the PIR causing the fault?

Link to comment
Share on other sites

AFAIK the LCD keypad can only translate 'LED data' from the system into locally defined messages.

 

So if the keypad is showing what I would assume is the 'default screen' it suggests the data connection to the panel has been lost, just the power remaining, or the panel is goosed other than the PSU.

 

Have you tried turning it off and on again?

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Link to comment
Share on other sites

1 hour ago, ThornGamma6 said:

Hi, I'm having Issues with my Accenta G4 and all its doing is the RKP is just displaying Accent G4 RKP F131-01-111 I have 6 zones in use and all pirs are the Pyronix Equinox pirs and 1 of them is above the keypad in the corner of my hallway by the front door. would it be the PIR causing the fault?

Have you replaced the keypad recently 

Link to comment
Share on other sites

1 hour ago, al-yeti said:

Have you replaced the keypad recently 

Tbh Its second hand and the panel says Accenta 8 mini on the front 

1 hour ago, datadiffusion said:

AFAIK the LCD keypad can only translate 'LED data' from the system into locally defined messages.

 

So if the keypad is showing what I would assume is the 'default screen' it suggests the data connection to the panel has been lost, just the power remaining, or the panel is goosed other than the PSU.

 

Have you tried turning it off and on again?

I've tried turning it off and on again but doesn't seem to be working  

Link to comment
Share on other sites

16 minutes ago, ThornGamma6 said:

It does have 1ft long cable going to the panel and it doesn't work mate. This system was removed from a building that was getting demolished and I got first dips into the alarms I even saved to Pyronix Deltabells 

 

Historic England won't thank you though; next time just go for the copper, and spend 1/3 of the payout on a Vanderbilt SPC. Trust me.

Edited by datadiffusion

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Link to comment
Share on other sites

36 minutes ago, MrHappy said:

you've tested the cable between controls & rkp ?

Yes mate I have

27 minutes ago, datadiffusion said:

 

Historic England won't thank you though; next time just go for the copper, and spend 1/3 of the payout on a Vanderbilt SPC. Trust me.

I got a bit of copper which I'm going to sell for scrap

Link to comment
Share on other sites

3 hours ago, sixwheeledbeast said:

 

4 hours ago, datadiffusion said:

 

Historic England won't thank you though; next time just go for the copper, and spend 1/3 of the payout on a Vanderbilt SPC. Trust me.

I got a bit of copper which I'm going to sell for scrap

 

3 hours ago, sixwheeledbeast said:

You have a waste carrying license?

No, but my Uncle does

Link to comment
Share on other sites

1 hour ago, sixwheeledbeast said:

So your Uncle removed the waste from the site then?

Seriously, there have been plumbers fined for old radiators in there vans without a license.

If deemed scrap on site you need a waste license to remove.

Waste license to carry 

 

You carry as many rads as you want if you were to say they are for Refurbs 

 

 

5 hours ago, sixwheeledbeast said:

You have a waste carrying license?

For waste removal or collection 

 

Or from your own works?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.