sixwheeledbeast Posted March 20, 2017 Share Posted March 20, 2017 I don't think I could trust push fit, especially on a supply or rising main. Quote Link to comment Share on other sites More sharing options...
norman Posted March 20, 2017 Share Posted March 20, 2017 My incoming is plaggy compression, not much better tbf Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
datadiffusion Posted March 20, 2017 Share Posted March 20, 2017 To be honest I'd trust a £30 John Guess push fit valve converting rising main MPDE to copper / push fit over those hideous Screwfix £7.99 'MDPE one end, 15mm the other' Chinese made valves that most modern houses seem to have. http://www.screwfix.com/p/poly-stop-cock-25mm-x-15mm/86048 Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
aissecur Posted March 21, 2017 Share Posted March 21, 2017 sorry yes that is correct - reason I said flex is its a similar size / shaped to a 1.5mm twin & earth Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted March 21, 2017 Share Posted March 21, 2017 Yep they even give you 2.5 T+E clips to fix it! Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.