Jump to content
Security Installer Community

Everest Abacus 6-14 fob remote control query


richduc

Recommended Posts

I am 99% sure its not programmable I got a point on a NSI inspection in 2010 because you could still disarm the system with the code. We had to fit a relay to the open and close output to down power the keypad whilst set to get around it.  

Link to comment
Share on other sites

  • Replies 68
  • Created
  • Last Reply

Top Posters In This Topic

9 hours ago, james.wilson said:

on a serious note its a ksw not a native from something that old?

 

apart from a data connection theres no other wiring from radio expander to controls,

 

radio zones are no. 11 to 88, it was class 5 radio system

Mr? Veritas God

Link to comment
Share on other sites

20 minutes ago, PeterJames said:

I am 99% sure its not programmable I got a point on a NSI inspection in 2010 because you could still disarm the system with the code. We had to fit a relay to the open and close output to down power the keypad whilst set to get around it.  

 

That would have caused a tamper, surely??

17 minutes ago, MrHappy said:

 

apart from a data connection theres no other wiring from radio expander to controls,

 

radio zones are no. 11 to 88, it was class 5 radio system

 

I'm guessing this is kit from under Bosch ownership, or was it very late DA designed kit that attracted Bosch in the first place?

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Link to comment
Share on other sites

14 minutes ago, datadiffusion said:

 

That would have caused a tamper, surely??

 

It was how Da instructed us to get around the problem, it may not have been power it may have been data or something it was 7 years ago now.

Link to comment
Share on other sites

16 minutes ago, datadiffusion said:

 

 

 

I'm guessing this is kit from under Bosch ownership, or was it very late DA designed kit that attracted Bosch in the first place?

IIRC Bosch took over about the same time as DD243 came about 2010 ish. Bosch could have done so much more with DA I was surprised when they took the route of Castle, it must have hit their profit margin, not only paying Castle for a rebadged product but developing their own keypad to work with it 

Link to comment
Share on other sites

11 minutes ago, al-yeti said:

All scrap now , except you find a good condition one for a garage or something

 

Live in hope eh? I've seen you waiting on the doors at 5am for the Hounslow boot sale...

11 minutes ago, PeterJames said:

IIRC Bosch took over about the same time as DD243 came about 2010 ish. Bosch could have done so much more with DA I was surprised when they took the route of Castle, it must have hit their profit margin, not only paying Castle for a rebadged product but developing their own keypad to work with it 

 

It seemed as if they bought DA and just buried it.

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Link to comment
Share on other sites

17 minutes ago, PeterJames said:

It was how Da instructed us to get around the problem, it may not have been power it may have been data or something it was 7 years ago now.

 

I've had to the same thing. Think if you used the relay to disconnect the B terminal of the keypad the keypad presses were disabled.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.