Cubit Posted July 24, 2014 Share Posted July 24, 2014 My actual sensor looks like this: The left hand sensor is wired, the right one isn't Whilst it's a little snug when closing (as the door has expanded slightly), the sensor cases are not at all loose. Any ideas? Thank you so much! No picture but your comment suggests even more so, lid tamper is likely cause. Quote Link to comment Share on other sites More sharing options...
Alice Goody Posted July 24, 2014 Author Share Posted July 24, 2014 No picture but your comment suggests even more so, lid tamper is likely cause. Sorry! Hopefully this will show the picture.... Is this something that you think I could fix? Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted July 24, 2014 Share Posted July 24, 2014 Ah, Elmdene contacts. Yuck. I hate their surface models. If the lids are tight, you'll really have to call someone out who would probably change the contact. We do have members in that area, there is a directory on here or you could use the SSAIB and NSI searches as above. Hope this helps! Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
norman Posted July 24, 2014 Share Posted July 24, 2014 That also needs realigning. Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
al-yeti Posted July 24, 2014 Share Posted July 24, 2014 That also needs realigning. Yes , they don't work that good fitted that way, and don't have lid tamper must be connection problem, are they all the same comes with a tail and join is act somewhere else? Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted July 24, 2014 Share Posted July 24, 2014 The ones I fitted were switch tampered - http://www.elmdene.co.uk/grade-2-magnetic-plastic-contacts.html Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
Ronnie Posted July 24, 2014 Share Posted July 24, 2014 (edited) I'm in Plymouth (south west) Try AlarmGuard on 01736 370067.. They're based in Penzance so may cover Plymouth. They have helped us out with our clients down there in the past and have been exceptionally helpful. Edited July 24, 2014 by RFS Quote Link to comment Share on other sites More sharing options...
matthew.brough Posted July 24, 2014 Share Posted July 24, 2014 Maybe will make it 4001 Quote www.securitywarehouse.co.uk/catalog/ Link to comment Share on other sites More sharing options...
morph Posted July 24, 2014 Share Posted July 24, 2014 Give Steve at Plymstock Security a call local company 01752-404303. He is a member of these forums as well so might see the topic and reply Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.