Scotmod Posted July 25, 2011 Share Posted July 25, 2011 Hi guys, have a job where a previous company have installed a Sterling 10 with vipers/door contacts only and the system doesnt set. Enter the user code, sounder keeps ringing after 30 seconds, tried entry/exit but nothing sets the system. Just doesn't seem to play ball. Doesn't set with part or omit either and no tamper faults. Any ideas? Link to comment Share on other sites More sharing options...
PeterJames Posted July 25, 2011 Share Posted July 25, 2011 sounds like an open-circuit somewhere...........mind you I wouldn't trust a sterling 10 to prop a door open let alone secure a property Link to comment Share on other sites More sharing options...
Scotmod Posted July 25, 2011 Author Share Posted July 25, 2011 Checked all of the circuits but nothing seemed out of the ordinary. They look like shoddy panels to me, never dealt with them before but the RKP is absolutley useless! Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted July 25, 2011 Share Posted July 25, 2011 I wouldn't trust a sterling 10 to prop a door open let alone secure a property Argeed. Link to comment Share on other sites More sharing options...
Monty Posted July 25, 2011 Share Posted July 25, 2011 very slow on to the next progg before the text comes up one of our sites got taken over and the company took out the Menvier TS 700 that was working perfectly and fitted a sterling 10 then never came back !! www.AllanMoncrieffAlarms.com Link to comment Share on other sites More sharing options...
superstardeejay Posted July 28, 2011 Share Posted July 28, 2011 I suppose you could try a fac reset. These do seem one of those panels that easily glitch. Trying to set with a zone activated usually comes up with the name of the zone active. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.