angellonewolf Posted May 21, 2009 Share Posted May 21, 2009 yes hello again if you are looking from last topic just to ask resisters in pirs and panels what are they for and will panels need just the right ones assume they are for if some trys to trick the system in to linking tampers/ pirs so they think they are stilll conected in series eg a to b to c to d try to tamper and link a to d to cut out b and c alarm will sence this? thanks angel Link to comment Share on other sites More sharing options...
whistle Posted May 21, 2009 Share Posted May 21, 2009 Sort of.... Link to comment Share on other sites More sharing options...
angellonewolf Posted May 21, 2009 Author Share Posted May 21, 2009 sort of a bit of expansion on that please Link to comment Share on other sites More sharing options...
Adi Posted May 21, 2009 Share Posted May 21, 2009 s o r t o f I really can't be ar**** with it anymore. Link to comment Share on other sites More sharing options...
lawandorder Posted May 21, 2009 Share Posted May 21, 2009 The resistors do need to be compatible with the panel. Different makes of panel do use different values of resistor but if you replace your existing panel like for like you won't have to replace the resitors. Link to comment Share on other sites More sharing options...
angellonewolf Posted May 21, 2009 Author Share Posted May 21, 2009 can you install alarm with out resisters Link to comment Share on other sites More sharing options...
lawandorder Posted May 21, 2009 Share Posted May 21, 2009 can you install alarm with out resisters Yes you can, many panels (the Texecom Veritas for example) can be programmed for use with double pole wiring so no resistors required. FSL wiring with resistors is far more secure though and you only need a 4 core cable to a PIR instead of a 6, also with maby panels you get more diagnostic information at the panel by using FSL wiring. Link to comment Share on other sites More sharing options...
Vince8282 Posted May 21, 2009 Share Posted May 21, 2009 Some detectors now come with built in resistors so you don't need the ones supplied with the panels. You just select the value of the apropriate resistor by selecting either a switch or a link within the detectors themselves so make sure you select the correct values and ckeck the readings with a meter as you cant believe everything you read. best wishes Vince Practice in the morning, practice at night. Practice in the evening, until you get it right. Only make sure you are practising in the right way at the right time for it. Link to comment Share on other sites More sharing options...
galaxyclass Posted May 22, 2009 Share Posted May 22, 2009 aswell as being more secure, eol resistors provide you with a monitored circuit for faults, ie: short or open circuit. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.