Jump to content


Photo
- - - - -

Scantronic 9651 Installer Manual


  • Please log in to reply
12 replies to this topic

#1 pollyx

pollyx

    Newbie

  • Newbie
  • 6 posts

Posted 03 November 2007 - 01:04 PM

Hi, is it possible to get (ive searched) a copy of the installer and programming manual for this system? My installer never left it here when he finished.

Any help appreciated.
  • 0

#2 antinode

antinode

    Super Member

  • Trade Full Member
  • PipPipPipPipPipPip
  • 1,473 posts

Posted 03 November 2007 - 01:35 PM

Sorry, but we are not authorized to give out such information due to potential security and copyright issues. The manual itself is of little use anyway without the engineers code. If you have an issue with your system, perhaps contact the original installer for advice.
  • 0
Trade Member

#3 pollyx

pollyx

    Newbie

  • Newbie
  • 6 posts

Posted 03 November 2007 - 04:11 PM

Sorry, but we are not authorized to give out such information due to potential security and copyright issues. The manual itself is of little use anyway without the engineers code. If you have an issue with your system, perhaps contact the original installer for advice.



I already have the engineers code for the system, just looking for the installtion manual.
  • 0

#4 magpye

magpye

    Super Member

  • Trade Full Member
  • PipPipPipPipPipPip
  • 1,365 posts

Posted 03 November 2007 - 04:20 PM

Sorry, but we are not authorized to give out such information due to potential security and copyright issues. The manual itself is of little use anyway without the engineers code. If you have an issue with your system, perhaps contact the original installer for advice.

Engineer Codes - Who can have them

With a professionally installed system,
British Standard PD6662 (effective from 1st October 2005) dictates that only engineers can access engineering

Permitting a user to access engineering breaks regulations


Hope this helps you to understand where we are coming from
  • 0
Someone told me I was ignorant and apathetic, I don't know what that means, nor do I care.

#5 IanHug

IanHug

    Member +

  • Newbie
  • PipPip
  • 65 posts

Posted 03 November 2007 - 05:06 PM

Engineer Codes - Who can have them

With a professionally installed system,
British Standard PD6662 (effective from 1st October 2005) dictates that only engineers can access engineering

Permitting a user to access engineering breaks regulations
Hope this helps you to understand where we are coming from


Doesn't this depend on the Grade of alarm? DIY = Grade 1 anyway?

If you search for "Scantronic 9651 engineers manual" on Google at least one shop linked will sell you one for 9.99.

You might try asking on www.Diynot.com also.
  • 0

#6 Guest_anguscanplay_*

Guest_anguscanplay_*
  • Guests

Posted 03 November 2007 - 05:09 PM

You might try asking on www.Diynot.com also.



you`ll get Breezer answering - he knows less but posts more than most of the diyers on here
  • 0

#7 magpye

magpye

    Super Member

  • Trade Full Member
  • PipPipPipPipPipPip
  • 1,365 posts

Posted 03 November 2007 - 05:27 PM

Doesn't this depend on the Grade of alarm? DIY = Grade 1 anyway?

If you search for "Scantronic 9651 engineers manual" on Google at least one shop linked will sell you one for 9.99.

You might try asking on www.Diynot.com also.

Who, other than you, has mentioned DIY?
  • 0
Someone told me I was ignorant and apathetic, I don't know what that means, nor do I care.

#8 IanHug

IanHug

    Member +

  • Newbie
  • PipPip
  • 65 posts

Posted 03 November 2007 - 05:43 PM

Who, other than you, has mentioned DIY?


He's got the Engineer's code & is looking for a manual.

Doesn't sound like it's professionally maintained.
  • 0

#9 barooga

barooga

    Member ++++

  • Banned
  • PipPipPipPipPip
  • 546 posts

Posted 03 November 2007 - 06:10 PM

He's got the Engineer's code & is looking for a manual.

Doesn't sound like it's professionally maintained.

That's an assumption.
Have you considered why the OP has not gone back to the original installer??
Not that it matters, we still can't give the manual out.

Oh, and Ebay and a manual for 9.99. do us all a favour.
  • 0
Growing old is mandatory, growing up is optional

#10 magpye

magpye

    Super Member

  • Trade Full Member
  • PipPipPipPipPipPip
  • 1,365 posts

Posted 03 November 2007 - 06:31 PM

That's an assumption.
Have you considered why the OP has not gone back to the original installer??
Not that it matters, we still can't give the manual out.

Oh, and Ebay and a manual for 9.99. do us all a favour.

Thanks for that, you beat me to it
  • 0
Someone told me I was ignorant and apathetic, I don't know what that means, nor do I care.

#11 IanHug

IanHug

    Member +

  • Newbie
  • PipPip
  • 65 posts

Posted 03 November 2007 - 06:47 PM

Permitting a user to access engineering breaks regulations


So which Grades of alarm does this apply to?
  • 0

#12 alterEGO

alterEGO

    Elite Member ++

  • Trade ONLY
  • PipPipPipPipPipPipPipPipPipPip
  • 8,390 posts

Posted 03 November 2007 - 06:58 PM

So which Grades of alarm does this apply to?

it bares no relevance as what ever the poster tells us we don't know the true grade of the system installed, and we wouldn't like someone to give our customers a manual causing them to void their contract and forcing us into a legal issue we could do without.
  • 0

#13 magpye

magpye

    Super Member

  • Trade Full Member
  • PipPipPipPipPipPip
  • 1,365 posts

Posted 03 November 2007 - 07:54 PM

it bares no relevance as what ever the poster tells us we don't know the true grade of the system installed, and we wouldn't like someone to give our customers a manual causing them to void their contract and forcing us into a legal issue we could do without.

:rolleyes:
  • 0
Someone told me I was ignorant and apathetic, I don't know what that means, nor do I care.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users