Serg

Videx 8380 kit is nice solution. We use it to forward call to mobile if nobody in, no app required.

Extra to above Ghostly image may be result of wrong end of line termination of video signal. Any T-BNC in the system or loop through devices like monitors? I also would check transformer what may not provide decent noise filtration. Power up both cameras form battery source.

Hello, Anybody can help to get this obsolete panel or just main PCB? Required min 4 zones. Thanks

If you have installation manual it is on page 17.

Seems you need new battery, usually 2.1Ah 12V. Wondering it was lasting for 10 years! Hope you know engineer code for your panel because it needs power reset upon battery change.

Sure, it is so called ground loop issue. Very common prob in cctv systems here.

Hi, Doorentry panel is Acet Family Kit and button code for it is F110. Unfortunately it is no longer manufactured so spares are not available from wholesalers. I think apart of installing of new system other option is to hunt on ebay for new or used panels and strip button. That can cost you less when replacing whole system.

ACET 702 is a model of handset only If you are about fault in front door panel please look at its model or post picture as ACET has different panels and buttons for it. Meanwhile I can't imagine case why call button can't be repaired as it is simple "push to close" contact what needs simple adjustment or cleaning. Do you have spare unsued buttons on your door panel?

You always can take a cup of tea awaiting built-in battery getting flat )))