Jump to content
Security Installer Community

firemonkey

Trade Full Member
  • Posts

    59
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by firemonkey

  1. https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/security-control-panels-c-36_102/control-panels-all-c-36_102_41/ade-honeywell-accenta-metal-gen4-with-lcd-keypad-p-1010.html Would recommend paying the extra for the metal case, plastic sometimes go brittle on them over long periods
  2. If want simple then the Honeywell Accenta G4 with LCD keypad could be an option. You can have 4 keypads on it and 8 zones in a cheap £50 kit including a keypad with about £25 for an extra keypad.
  3. Could it be a bad connection in the kitchen door contact causing a tamper of some kind? if there's a PIR in kitchen too, check that as might be same text Is there anything else in the log past that which could give any other indication? Might be showing the kitchen door contact first but what caused the activation could be an entry before it as you enter that door to stop the alarm
  4. Problem with being asked for a breakdown, is either the customer will supply their own equipment (Typical response, I can get it cheaper off eBay.... or use it for a sparky to quote against.
  5. Potentially if you have CCTV, someone will break in and steal the DVR, they then get to take away the DVR with all their own burglary on it along with anything else up for grabs
  6. Your alarm system gets haunted and monitored from the afterlife
  7. Give the system a bit of a once over while its fresh in your head We can give you a few tips, should you decide to take them onboard and not just grab help when in the **** and run
  8. Perhaps he's using it to call all the islanders to the cave to feast as in HG Wells Time Machine
  9. Version 3.05.00

    1 download

    Latest version of the VSC software for working with all VESDA panels Panels using the 15 pin connector will need a Vesda HLI to communicate with, otherwise just a standard 9 pin serial lead (Male to Female)
  10. VSCSetup (Xtralis VSC Installation Program V3.05.00).msi View File Latest version of the VSC software for working with all VESDA panels Panels using the 15 pin connector will need a Vesda HLI to communicate with, otherwise just a standard 9 pin serial lead (Male to Female) Submitter firemonkey Submitted 03/09/2017 Category Vesda
  11. Pc-Net 003 Config Tool (MxPro Standard) V6.75 View File PC-Net003 Software for the Advanced MxPro (Version 6.75) Submitter firemonkey Submitted 03/09/2017 Category Advanced Electonics
  12. Version 6.75

    14 downloads

    PC-Net003 Software for the Advanced MxPro (Version 6.75)
  13. Perhaps its a toy car factory.. Then perfectly plausible
  14. Never heard of a MrHappy either lol Everyone is always miserable
  15. I do love the master blasters.... Though only in large open spaces, wiring one up at home and turning it on makes for a quick unplugging
  16. I've sent you a direct PM with the address and a screenshot showing I sent it to vetting too
  17. As its an Abacus system, it will most likely be a very old PA button, so taking it apart to reset and put back together and then enter your code to reset system.
  18. My preference would be grade 3 with the grade 4 monitoring. The security guard could be classed as irrelevant for the alarm as he would just be a user of the system, but would consider external monitoring of a panic button incase of some kind of raid for the guard to use to summon help.
  19. Doing it now Done... Will reply soon as get it come through. I'd use company ID card but its buried under everything in the boot
  20. Sorry but I'm asking to get the e-mail address to send you proof of being an engineer, I'm trying to follow what you want but need a little help from you to let me know the e-mail address to send it to. So I"m not trying to not comply, quite the opposite! I even have my e-mail page open ready to copy the address into If you do not want to accept an e-mail as proof, I'd suggest removing that as an option for being verified?
  21. I was hoping the Vetting PM would have replied with an address to send it to
  22. I was going to send an e-mail from my company e-mail account if that is acceptable as is from a well known trade account
  23. I've sent it over to the Vetting profile, but will drop you a PM in a sec too
  24. Hi everyone, Just realised I haven't introduced myself here, can often be found on the other fire engineers forum but as been working on and off with security in-between fire systems for nearly 12 years now thought I'd be wise to sign up here too. Pending approval but have put in my trade membership application *poke poke* Intruder products work on most: Galaxy, Menvier, and the ancient DA systems Abacus... Access control: PAC (Legacy) and SecureNet, Janus CCTV: Pelco, but not touched one in 8 years Fire: (Well your not interested in that so will move on!) So yeah, I'm Firemonkey.... (Perhaps a FireandSecurityMonkey too)
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.